Postgraduate Programmes
M.Tech Dissertation Year Wise
| Sl No. | Academic Year | Specialization |
|---|---|---|
| 1 | 2020-2022 | |
| 2 | 2019-2021 | |
| 3 | 2018-2020 | |
| 2 | 2017-2019 | |
| 4 | 2016-2018 | |
| 5 | 2015-2017 | |
| 6 | 2014-2016 | |
| 7 | 2013-2015 | |
| 8 | 2012-2014 | |
| 9 | 2011-2013 | |
| 10 | 2010-2012 |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 20MT0014 | Abhishek Kumar Ranjan | Tribological Properties Evaluation of Coated Flux Through TIG Welding | Prof. A K Das |
| 2 | 20MT0021 | Aditya Kumar | Structural Analysis of Mobile Tower | Prof. M L Chandravanshi |
| 3 | 20MT0075 | Anupam Yadav | Predictive and Experimental Analysis of Railway Brake Pad | Prof. S K Ghosh |
| 4 | 20MT0184 | Krishan Kumar Singh | Prediction of Optimal Process Parameters for Braking Action | Prof. S K Ghosh |
| 5 | 20MT0248 | Nikhil Sharma | Experimental and Predictive Analysis to Evaluate the Tribological Perfomance of Graphene Nano Platelets Filled GFRP Composites | Prof. K K Singh |
| 6 | 20MT0252 | Om Prakash | Investigation on Friction Stir Additive Manufacturing of Dissimilar Materials: Pure Copper and AA6063 Alloy | Prof. A R Dixit |
| 7 | 20MT0337 | Roshan Kumar | Study of gear oil lubricant tip truck of mines | Prof. N K Singh |
| 8 | 20MT0390 | Shubham Maurya | Characterization of Tribological Properties of the Laser Claddded Titanium Alloy | Prof. Amitava Mandal |
| 9 | 20MT0391 | Shubham Shukla | Mathematical modeling for prediction of life of disc cutter in tunnel boring machine | Prof. S Chattapadhyay |
| 10 | 20MT0411 | Subir Kumar | Study of Pressure Distribution, Velocity Distribution and Erosion Wear of Pelton Turbine | Prof. S Sarkar |
| 11 | 20MT0451 | Vishal Anand | Numerical Investigation of Performance and Electrical Parameter of Tilting Pad Thrust Bearing | Prof. S Azam |
| Sl. No | Admn. No | Name of the candidate | Specialization | Guide(s) | Title of the thesis | Passing year |
|---|---|---|---|---|---|---|
| 1 | Abhinav Kumar | 20MT0007 | Manufacturing | Prof. N.K.Singh | Fabricating micro-holes through μ-EDM process & their circularity testing | 2022 |
| 2 | AMIT KUMAR BHARTI | 20MT0053 | Manufacturing | Prof. A. Mandal | Effects of Inter-layer dwell time on the properties of steel components fabricated through Wire Arc Additive Manufacturing (WAAM) Process | 2022 |
| 3 | GAURAV MISHRA | 20MT0160 | Manufacturing | Prof. S Chattopadhyay | Experimental and Numerical analysis of Friction STIR welding of al2024-T3 and 7075-T6 alloy | 2022 |
| 4 | Kunwar Sourabh Kumar Singh | 20MT0191 | Manufacturing | Prof. K.K. Singh | Computional Data-Dnun and Optimization of Tribology | 2022 |
| 5 | LALAN KUMAR | 20MT0195 | Manufacturing | Prof. A.R. Dixit & Prof. Zafar Alam | Modeling, prediction, Validation of process parameter of FSN using ANN | 2022 |
| 6 | Mithilesh Singh | 20MT0223 | Manufacturing | Prof. A. K. Das | Parametric analysis to enhance printing in Metalwith electrochemical additive manufacturing | 2022 |
| 7 | Mrigendra Shukla | 20MT0229 | Manufacturing | Prof. S Chattopadhyay | Effect of nano sic Powder and surtactent mixed Diedectric in EDM | 2022 |
| 8 | "Mukesh Kumar | 20MT0235 | Manufacturing | Prof. A.R. Dixit | Tensile, Flexural and Compressive Strength of Natural and Glass Fabric Composites Fabricated using Vat-polymerization-based Additive Manufacturing Technique | 2022 |
| 9 | Nikhil Phadke | 20MT0247 | Manufacturing | Prof. A.R. Dixit | Manufacturing and Designing of Engineering Components using Direct Ink Writing and Laser Powder Bed Fusion Additive Manufacturing Techniques | 2022 |
| 10 | RAVI KANT | 20MT0322 | Manufacturing | Prof. A. Mandal | Investigation into the bio dielectric fluid based sustamnable EDM process | 2022 |
| 11 | SHRI NARAYAN AGNIHOTRI | 20MT0381 | Manufacturing | Prof. K.K. Singh | interfarance of nanoclyan mechanical properties of CFRP & GFRP | 2022 |
| 12 | SONAKSHI HAZRA | 20MT0403 | Manufacturing | Prof. A. K. Das | EL deposition of Ni-P and Ni-P-Al2O3-hBN composite coating on al-7075 and their charecterstics | 2022 |
| 13 | Vinit Kumar | 20MT0447 | Manufacturing | Prof. A.R. Dixit & Prof. Zafar Alam | Investigation of microstructural, mechanical and tribological performance on diddimilar friction stir welding of aluminium and magnesium alloys in a lap joint | 2022 |
| Sl. No. | Admission Number | Name of student | Title of the Thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 20MT0084 | Arkadyuti Ghosh Roy | Effect of varying location of entropic excitation on a natural laminar flow airfoil | Prof. T K Sengupta |
| 2 | 20MT0080 | Ardhendu Chakraborty | Comparision between heating and cooling on a natural laminar flow airfoil | Prof. T K Sengupta |
| 3 | 20MT0096 | Atul Kumar Verma | Role of thermal stratifications in free shear flows: Combined KH-RT instability | Prof. Aditi Sengupta |
| 4 | 20MT0206 | Mannem Ajay Kumar | Investigation of drops evaporating in a quiescent environment: Influence of relative humidity | Prof. Deepak Kumar Mandal |
| 5 | 20MT0092 | Ashutosh Kumar | Investigation of two phase flow maldistribution in mini-channel heat sink | Prof P K Singh |
| 6 | 20MT0259 | Pankaj Kumar | Thermodynamic analysis of a Kalina based combined cooling and power cycle driven by low-grade heat source | Prof R K Das |
| 7 | 20MT0153 | Diwakar Singh | Transient surface heat flux measurement in short duration over aerodynamic models from K-type coaxial thermocouple | Prof Rakesh Kumar |
| 8 | 20MT0012 | Abhishek Kumar | Experimental study of natural convection heat transfer over vertical and horizontal cylinder kept inside a rectangular duct filled with air | Prof S N Singh |
| 9 | 20MT0126 | Chandan Kumar Bhardw | Direct numerical simulation of transonic buffeting for flow over Naca airfoil | Prof. Swagata Bhaumik |
| 10 | 20MT0090 | Ashish Kumar Gaurav | Control of broadband noise using v-serrations at the leading and trailing edges of a flat plate | Prof S Narayanan |
| 11 | 20MT0022 | Aditya Kumar Choudha | Prediction and prevention of cavitation on rotor of Kaplan turbine using RBNN | Prof S Sarkar |
| 12 | 20MT0094 | Ashwani Gupta | The transient interfacial dynamics for boiling heat transfer using nanofluids | Prof S K Ghosh |
| Sl. No | Admn. No | Name of the candidate | Specialization | Year of Award | Title of the thesis | Guide(s) |
|---|---|---|---|---|---|---|
| 1 | 20MT0037 | Akshay Pratap Singh Tomar | Machine Design | 2022 | Fault analysis of spur helical and herringbone gears | Dr. M L Chandravanshi |
| 2 | 20MT0046 | Amar Verma | Machine Design | 2022 | Power source noise identification and device isolation using Artificial intelligence | Dr. Arun Dayal Udai |
| 3 | 20MT0114 | Bhabhor Nileshkumar Sevabhai | Machine Design | 2022 | Fault diagnosis and fault tolerant control of hydraulic pump-motor drives | Dr. S K Ghosal |
| 4 | 20MT0141 | Deepak Singh | Machine Design | 2022 | Free vibration anlysis of FGM plate with unidirectional thickness variation | Dr. M S Azam |
| 5 | 20MT0233 | Mukesh Kumar Rajak | Machine Design | 2022 | Dual clutch transmission and fuel efficiency | Dr. Sachin Kumar Singh |
| 6 | 20MT0291 | Puspendu Bera | Machine Design | 2022 | Buckling analysis of isotropic and orthotropic plate using HSDT and RPT model | Dr. P K Mahato |
| 7 | 20MT0353 | Sankalp Meshram | Machine Design | 2022 | Optimisation of rotating disk under thermo-mechanical load using Taghuchi design of experiment | Dr. Ashis Mallick |
| 8 | 20MT0377 | Shivam Kumar | Machine Design | 2022 | Interfacial fracture analysis of SCB sandwich specimen | Dr. Sarthak Singh |
| 9 | 20MT0410 | Subhash Tomar | Machine Design | 2022 | Energy management of a power hydraulic system | Dr. S K Ghosal |
| 10 | 20MT0444 | Vimal Sagar | Machine Design | 2022 | Design and development of parallel manupulator for 5D printing | Dr. Arun Dayal Udai |
| 11 | 20MT0466 | Ramesh Majhi | Machine Design | 2022 | Blast simulation and experiment of high strength armour materials for armoured fighting vehicle against mine blast | Dr. Ashis Mallick |
| Sl. No | Admn. No | Name of the candidate | Specialization | Year of Award | Title of the thesis | Guide(s) |
|---|---|---|---|---|---|---|
| 1 | 19MT0029 | Ajay Kaushal | Manufacturing | 2021 | Temperature distribution of friction stir welded AA6061 aluminium alloy using comsol multiphysics | PROF. S.CHATTOPADHAYA |
| 2 | 19MT0436 | Vikas Kumar Singh | Manufacturing | 2021 | Theoritical analysis of Ti-6Al-4V alloy sheet bending | PROF. A. K. DAS and Prof.A.Kar |
| 3 | 19MT0330 | Rohit KUmar | Manufacturing | 2021 | WELD BEAD MODELING IN WIRE AND ARC ADDITIVE MANUFACTURING | PROF. A. K. DAS |
| 4 | 19MT0197 | Laxmi Devi | Manufacturing | 2021 | Prediction of Response parameters of EDM using artificial neural network | PROF. S.CHATTOPADHAYA |
| 5 | 19MT0167 | Jaya Kori | Manufacturing | 2021 | Effect of oxide fluxes on Active Flux Tungsten Inert Gas Welding | PROF. N. K. SINGH and Prof.A.Kar |
| 6 | 19MT0141 | Gaurav Kumar | Manufacturing | 2021 | Analytical inter laminar shear testing of unidirectional and multi directional Carbon/epoxy composite systems | PROF. K.K SINGH |
| 7 | 19MT0156 | Hemlata Jangid | Manufacturing | 2021 | Study of dissimilar friction stir welding using Al-steel plate | PROF. N. K. SINGH and Prof.A.Kar |
| 8 | 19MT0130 | Dhanraj Kumar Sharma | Manufacturing | 2021 | Analysis of woven carbon fiber polymer composite under impact loading | PROF. V. BAJPAI |
| 9 | 19MT0367 | Shekhar Singh | Manufacturing | 2021 | 3D Extrusion based printability evaluation of composite ink by SFD simulation | PROF. A.R. DIXIT |
| 10 | 19MT0316 | Ranjesh Kashyap | Manufacturing | 2021 | Study of Powder mixed Electric discharge machining Process using different powder on different material | PROF. A. MANDAL |
| 11 | 19MT0120 | Chunnu Kumar Jha | Manufacturing | 2021 | Optimization of process parameters of alloy AA2014-T6 friction stir welds | PROF. A. KAR |
| 12 | 19MT0432 | Vibhuti Ranjan | Manufacturing | 2021 | Simulation of SLS process through Simufact software. | PROF. A.R. DIXIT |
| 13 | 19MT0400 | Sumit Kumar | Manufacturing | 2021 | A study of wear resistant surface coating on Ti-6Al-4V using Nickel based alloy as clad powder | PROF. A. MANDAL |
| 14 | 19MT0260 | Pappu Kumar | Manufacturing | 2021 | Analysis of failure mode and tensile strength prediction of thin ply CFRP angle ply laminate | PROF. K.K SINGH |
| Sl. No | Admn. No | Name of the candidate | Specialization | Year of Award | Title of the thesis | Guide(s) |
|---|---|---|---|---|---|---|
| 1 | 19MT0029 | Ajay Kaushal | Manufacturing | 2021 | Temperature distribution of friction stir welded AA6061 aluminium alloy using comsol multiphysics | PROF. S.CHATTOPADHAYA |
| 2 | 19MT0436 | Vikas Kumar Singh | Manufacturing | 2021 | Theoritical analysis of Ti-6Al-4V alloy sheet bending | PROF. A. K. DAS and Prof.A.Kar |
| 3 | 19MT0330 | Rohit KUmar | Manufacturing | 2021 | WELD BEAD MODELING IN WIRE AND ARC ADDITIVE MANUFACTURING | PROF. A. K. DAS |
| 4 | 19MT0197 | Laxmi Devi | Manufacturing | 2021 | Prediction of Response parameters of EDM using artificial neural network | PROF. S.CHATTOPADHAYA |
| 5 | 19MT0167 | Jaya Kori | Manufacturing | 2021 | Effect of oxide fluxes on Active Flux Tungsten Inert Gas Welding | PROF. N. K. SINGH and Prof.A.Kar |
| 6 | 19MT0141 | Gaurav Kumar | Manufacturing | 2021 | Analytical inter laminar shear testing of unidirectional and multi directional Carbon/epoxy composite systems | PROF. K.K SINGH |
| 7 | 19MT0156 | Hemlata Jangid | Manufacturing | 2021 | Study of dissimilar friction stir welding using Al-steel plate | PROF. N. K. SINGH and Prof.A.Kar |
| 8 | 19MT0130 | Dhanraj Kumar Sharma | Manufacturing | 2021 | Analysis of woven carbon fiber polymer composite under impact loading | PROF. V. BAJPAI |
| 9 | 19MT0367 | Shekhar Singh | Manufacturing | 2021 | 3D Extrusion based printability evaluation of composite ink by SFD simulation | PROF. A.R. DIXIT |
| 10 | 19MT0316 | Ranjesh Kashyap | Manufacturing | 2021 | Study of Powder mixed Electric discharge machining Process using different powder on different material | PROF. A. MANDAL |
| 11 | 19MT0120 | Chunnu Kumar Jha | Manufacturing | 2021 | Optimization of process parameters of alloy AA2014-T6 friction stir welds | PROF. A. KAR |
| 12 | 19MT0432 | Vibhuti Ranjan | Manufacturing | 2021 | Simulation of SLS process through Simufact software. | PROF. A.R. DIXIT |
| 13 | 19MT0400 | Sumit Kumar | Manufacturing | 2021 | A study of wear resistant surface coating on Ti-6Al-4V using Nickel based alloy as clad powder | PROF. A. MANDAL |
| 14 | 19MT0260 | Pappu Kumar | Manufacturing | 2021 | Analysis of failure mode and tensile strength prediction of thin ply CFRP angle ply laminate | PROF. K.K SINGH |
| Sl. No. | Admn. No. | Name of Candidate | Title of the Thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 19MT0046 | Amit Kumar | Numerical and experimental investigation for nucleate pool boiling of low concentration nano fluids | Prof. S. K. Ghosh |
| 2 | 19MT0069 | Anubhav Verma | Simulations of nano refrigerant fluids to study the thermal performance of refrigeration system | Prof. R. K. Das |
| 3 | 19MT0076 | Arbaz Alam | Numerical and analytical analysis of heat transfer enhancement in forced convection using Dimple plates | Prof. Rakesh Kumar |
| 4 | 19MT0186 | Kuldeep Singh | Heat transfer in filling of hydrogen tank | Prof. P. K. Singh |
| 5 | 19MT0203 | Manish kumar | Flow and heat Transfer Maldistribution under transient and periodic heat and flow loading with single and two phase | Prof. P. K. Singh |
| 6 | 19MT0210 | Mayank Dev | Numerical and experimental investigation of free convection heat transfer in cavities | Prof. S. N. Singh |
| 7 | 19MT0300 | Rahul Raj | Flow past a hybrid cylinder | Prof. subhankar Sen |
| 8 | 19MT0334 | Sahil patle | Plasma actuation | Prof. Swagata bhaumik |
| 9 | 19MT0343 | Sarang gupta | Computational analysis of coaxial thermocouple for short duration transient measurements | Prof. Rakesh Kumar |
| 10 | 19MT0433 | Vicky kumar | Airfoil flap design | Prof. S . Narayan |
| Sl. No | Admn. No | Name of the candidate | Specialization | Year of Award | Title of the thesis | Guide(s) |
|---|---|---|---|---|---|---|
| 1 | 19MT0015 | Abhishek Rai | Machine Design | 2021 | LIFE ESTIMATION OF A HIP PROSTHESIS BY FRACTURE ANALYSIS | K Jha |
| 2 | 19MT0017 | Adarsh Kumar Giri | Machine Design | 2021 | Modal analysis of condenser fan blade of domestic air conditioning unit | M L Chandravanshi |
| 3 | 19MT0020 | Aditya Abhinav | Machine Design | 2021 | FREE VIBRATION ANALYSIS OF FGM PLATE | Md. S Azam |
| 4 | 19MT0078 | Arijeet Subudhi | Machine Design | 2021 | Impedance Eduction Technique for Grazing Flow”for Grazing Flow | R N Hota |
| 5 | 19MT0092 | Atul Anand | Machine Design | 2021 | Omni Directional Force Control Using Wheeled Mobile Robot | A D Udai |
| 6 | 19MT0105 | Badri Vishal Agrahar | Machine Design | 2021 | ANALYSIS OF THERMAL STRESSES IN FGM CIRCULAR ROTATING TYPE FIN WITH VARIABLE THERMAL PARAMETER | A Mallick |
| 7 | 19MT0145 | Govind Patidar | Machine Design | 2021 | Design analysis of 2DOF spring mass damper using aansys, MATLAB and vibration analysis using SIMULINK PID controller | P K Mahato |
| 8 | 19MT0192 | Kunal Shahdeo | Machine Design | 2021 | Design and analysis of laminated composite box beam | P K Mahato |
| 9 | 19MT0211 | Mayank Khaparde | Machine Design | 2021 | Design of Suitable Anechoic Termination for High Mach Number Flow and improve Signal to Noise ratio |
R N Hota |
| 10 | 19MT0223 | Monu Kumar | Machine Design | 2021 | Contactless Eddy Current Braking System | M L Chandaravashi |
| 11 | 19MT0247 | Niraj Kanti Saha | Machine Design | 2021 | Damage detection in a camposite beam using discrete wavelet transform | S K Singh |
| 12 | 19MT0279 | Prakash Chandra | Machine Design | 2021 | Design and Development of 6-RPS Parallel Robot for Ocular Surgery | A D Udai |
| 13 | 19MT0297 | Rahul Kerketta | Machine Design | 2021 | FREE VIBRATION ANALYSIS OF BEAM WITH DIFFERENT BOUNDARY CONDOTIONS | Md.S Azam |
| 14 | 19MT0337 | Sandip Barik | Machine Design | 2021 | THERMAL ANALYSIS OF FIN USING ANSYS | A Mallick |
| 15 | 19MT0417 | Tuplal Kumar Verma | Machine Design | 2021 | Fault analysis of roller bearing using envelope analysis | S K Singh |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 18MT0007 | Amit kumar sharma | Analysis of laminated composite plate and its optimisation | P K Mahato |
| 2 | 18MT0064 | Bondalakunta S Kalyan Chakravarthi | Fault Diagnosis of Rolling Element Bearing using Convolutional
Neural Network & Long Short-Term Memory cell (CNN-LSTM) |
S K Singh |
| 3 | 18MT0071 |
Ayush Yadav | Buckling analysis of functionally graded plate | Md. S Azam |
| 4 | 18MT0072 |
Abhilash Khowal | Modeling and simulaton of a multi DOF robotic arm manipulator | S K Ghosal |
| 5 | 18MT0138 | Rajat Singh | Thermo-mechanical analysis of a functionally graded rotating disk | A Mallick |
| 6 | 18MT0154 | Abhay raj maurya | Numerical analysis of dynamic behaviour of Railway Track-Bogie system | S K Singh |
| 7 | 18MT0198 | Dhiraj Mishra | Design of an anechoic chamber | R N HOTA |
| 8 | 18MT0243 | Aditya Raj | Modelling of Vortex Induced Bladeless Wind Turbine | S Sarkar |
| 9 | 18MT0274 | Deepak | Modal Analysis of Tower Crane | M L Chandravanshi |
| 10 | 18MT0283 | Asif Reza | Failure analysis of Bearing in Slider Crank Mechanism | M L Chandravanshi |
| 11 | 18MT0336 | Rajdeep Chanda | Failure and Performance Analysis of Submersible pump using Vibration analysis | M L Chandravanshi |
| 12 | 18MT0363 | Vaibhav Jain | Kinematic and dynamic analysis of a single stage cycloidal speed reducer | S K Ghosal |
| 13 | 18MT0373 | Korthiwada Shashank | Computational analysis of visco-elastic constitutive theory | A Mallick |
| 14 | 18MT0408 | Manzoor Elahi | Fault detection and isolation of a hydraulic system using support vector machine | S K Ghshal |
| 15 | 18MT0411 | Subhankar Nayak | Effects of solid loading on the performance of a Strairmond high efficient cyclone | Kailash Jha |
| 16 | 18MT0435 | B Saurabh Paditrao | Geometric algorithm based method for efficient B-Spline surface fitting in reverse engineering | Kailash Jha |
| 17 | 18MT0444 | Wolson Soren | Synthesis and characterization of Al-based hybrid metal matrix composite through microwave sintering | A Mallick |
| 18 | 18MT0454 | Shivam Sharma | Design of Suitable Anechoic Termination as a Load to Improve the Acoustic Measurements at High Mean Flow | R N HOTA |
| 19 | 18MT0465 | Ved Prakash Dubey | Project-1: Controlled Unfolding of Elastic Hinges for Space
Applications using Shape Memory Polymer Composite Project-2: Effect on Microstructure and Mechanical Properties of Reinforced Particles in an Al-alloy |
A Mallick with Prof. Huang Wei Min (NTU, Singapore) |
| 20 | 18MT0523 | Thaqyudheen Bava P A | Free vibrational analysis of functionally graded plate on elastic foundation | Md. S Azam |
| 21 | 18MT0555 | Vishal Kanoujia | Modal analysis of the Upside down Fans installed on the poll located at central Hall of the Indian Parliament | M L Chandravanshi |
| 22 | 18MT0565 | Ramakant Yadav | Classification of Surface Defects on Steel using Convolution Neural Network | S K Singh |
| 23 | 18MT0573 | Chandra Prakash Shrama | MULTI MODE FRACTURE ANALYSIS OF HIP PROSTHESIS FOR CRITICAL CRACK SIZEDETERMINATION AND LIFE ESTIMATION | Kailash Jha |
| 24 | 18MT0594 | Atul verma | Laminated composite box beam | P K Mahato |
| Sl. No. | Admission No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 18MT0098 | Ashish Dangi | Vortex-induced vibrations of a square cylinder of low mass ratio at low Reynolds numbers | Prof. S. Sen |
| 2 | 18MT0006 | Vijay Kumar Chaudhary | Numerical analysis of gravitational water vortex turbine flow optimization and vortex turbine power calculation | Prof. S. Sarkar |
| 3 | 18MT0016 | Pasam Gopi Tejesh | Thermodynamic Analysis of Steam Ejector Refrigeration Cycle Using Computational Fluid Dynamics | Prof. R. K. Das |
| 4 | 18MT0026 | Manish D Pipal | Steady flow past a pair of identical circular cylinders in staggered arrangement | Prof. S. Sen |
| 5 | 18MT0043 | Swikriti Srivastava | Comparative Study Of Adiabatic Air- Water Two Phase Flow In Wavy And Straight Mini-Channel | Prof. P. K. Singh |
| 6 | 18MT0050 | Debansh Thakur | Effect of geometrical parameters on the thermal performance of chevron type plate heat exchanger | Prof. S. N. Singh |
| 7 | 18MT0060 | Abhishek Kumar | Experimental Analysis of Plate Heat Exchanger Using Copper Oxide Nanofluids | Prof. S. K. Ghosh |
| 8 | 18MT0095 | Sanjeev Verma | Design and Optimization of Heat exchangers for super critical fluids using entropy generation minimization | Prof. S. Sahoo |
| 9 | 18MT0097 | Tushar Kumar Gupta | Transverse-only vortex-induced vibrations of a diamond cylinder of low mass ratio | Prof. S. Sen |
| 10 | 18MT0111 | Sandeep Kumar Singh | Numerical Investigation of Hypersonic Flow Past Different Afterbody Configurations | Prof. S. Naraynan |
| 11 | 18MT0117 | Akhil K C | Effect of Surface Roughness On the Flow and Acoustic Characteristics of A NACA Airfoil | Prof. S. Naraynan |
| 12 | 18MT0147 | Vartika Singh | Evaporation of two similar drops in close vicinity | Prof. D. K. Mandal |
| 13 | 18MT0179 | Subhoday Gorai | Numerical Study of Heat Transfer and Pressure Drop Characteristics for Fin-and-plate heat exchangers | Prof. Rakesh Kumar |
| 14 | 18MT0231 | Mahesh Kumar | Investigating of blunt cones nose radius on drag in supersonic flows | Prof. Rakesh Kumar |
| 15 | 18MT0241 | Gaurav Shakya | Experimental and Theoretical Studies on Flow Characteristics ofVarious Non-Newtonian Fluids | Prof. S. Sahoo |
| 16 | 18MT0309 | Dashrath Kumar Saini | A New Ejector Absorber Cycle to Improve the COP of An Aqua AmmoniaAbsorption Refrigeration System | Prof. R. K. Das |
| 17 | 18MT0345 | Sumit Dhiman | Impact of a Water drops onto a spherical target | Prof. D. K. Mandal |
| 18 | 18MT0370 | Om Prakash Yadav | Drop impact on the micro textured surfaces | Prof. D. K. Mandal |
| 19 | 18MT0399 | Tarun Kumar | Numerical Comparison Of Heat Transfer And Fluid Flow Characteristics Of An Air Cooled Oblique Fin, Straight Channel And Branched Wavy 1.0 Mini-Channel Heat Sink | Prof. P. K. Singh |
| 20 | 18MT0409 | Shubham Kumar | Stability and analysis of a compressible boundary layer | Prof. S. Bhaumik |
| 21 | 18MT0428 | Ashish Kumar | Experimental analysis of parabolic concentrating solar collector with tracking system | Prof. S. N. Singh |
| 22 | 18MT0460 | Rishi Kapoor | Development Of Transient Hot Wire Setup And Measurement Of The Thermal Conductivity Of Nanofluids In Presence Of Magnetic Field | Prof. P. K. Singh |
| 23 | 18MT0469 | Deepak Kumar Rathour | Stainless Steel 304 | Prof. S. K. Ghosh |
| 24 | 18MT0568 | Prateek Sharma | Enhancement of Heat Transfer by Non-Conventional Methods | Prof. R. K. Das |
| 25 | 18MT0610 | Girija Shankar Tandan | Aerofoil broadband noise reductions through V-Shaped Multi-wavelength Trailing Edge Serrations | Prof. S. Naraynan |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 17MT001580 | Naveen Kumar Bankapalli | Developement of selective laser melting based metal 3D printer and study single tracks, single layer formation | Prof. Amitava Mandal |
| 2 | 18MT000048 | KRISHNA KUMAR YADAV | Fabrication of 3D mellic components through wire arc additive manufacturing process | Prof. A.K. Das |
| 3 | 18MT000052 | Sunny | Effect of Stress Concentration on Mechanical Properties of GFRP Laminates | Prof. K. K. Singh |
| 4 | 18MT000104 | ABHIK DEB | THE EFFECT OF PROCESS PARAMETER VARIATIONS ON ULTRASONIC MICRO-MACHINING OF MARAGING 250 STEEL, AND STUDYING THE RESIDUAL STRESS INDUCED ON IT BY ULTRASONIC SURFACE TREATMENT | Prof Alok Das |
| 5 | 18MT000116 | RAJIV C | MECHANICAL ANALYSIS OF Al2O3/ACRYLATE PHOTO-CURABLE NANO-COMPOSITE FABRICATED BY DIGITAL LIGHT PROCESSING (DLP) 3D PRINTING TECHNOLOGY | Prof. A.R. Dixit |
| 6 | 18MT000135 | Nikhil Bhardwaj | A critical comparison of Mechanical Properties and Stress Corrosion Cracking behaviour of Gas Tungsten Arc welded Nimonic -263 joints | Prof. S. Chattopadhyaya |
| 7 | 18MT000139 | Abhishek Kumar Sinha | Laser beam welding of nickel based super alloy INCONEL 625 | Prof.N.K Singh |
| 8 | 18MT000184 | Sovan Kumar Ray | Effect of small ply angle variation in Tensile, Compressive and Fatigue strength of woven GFRP Composite: Application of two parameter weibull Distribution | Prof. K. K. Singh |
| 9 | 18MT000209 | MONTY KUMAR | Study of WC based Wear Resistant Surface Coating on Ti-6Al-4V alloy using Pre-placed Powder TIG Cladding Method | Prof. Amitava Mandal |
| 10 | 18MT000238 | Gautam Kumar | Studies on the metallurgical and mechanical properties and corrosion behaviour of inconel 625and duplex 32750 dissimilar joints by TIG welding | Prof.N.K Singh |
| 11 | 18MT000286 | Chitranjan Kumar | Discharge states detection in die-sinking EDM and their correlations with response parameter | Prof. Amitava Mandal |
| 12 | 18MT000304 | Rohit Raj | Stress corrosion cracking resistant weld generation of hastelloy C 276 | Prof. S. Chattopadhyaya |
| 13 | 18MT000305 | Ravi Kant | Orthogonal Micromachining and Machinability analysis of Quartz Glas | Prof. V Bajpai |
| 14 | 18MT000371 | Karunesh Kumar | Parametric Optimization of performance in End Milling operation of CFRP Laminate modified with Fillers | Prof. K. K. Singh |
| 15 | 18MT000379 | Mayank Salecha | Effect of SiC powder and surfactant mixed with dielectric in electric discharge machining of inconel 718 | Prof. S. Chattopadhyaya |
| 16 | 18MT000417 | Sudhanshu Dole | Study and fabrication of micro textured surfaces | Prof. V Bajpai |
| 17 | 18MT000423 | PRASHANT KUMAR SINHA | Optimization of process parameters of WEDT for generating 3D complex profile by TLBO and Genetic Algorithm | Prof. Amitava Mandal |
| 18 | 18MT000466 | ADARSH KESHARI | CNC ASSISTED TIG COMPOSITE CLADDING ON Ti-6Al-4V SUBSTRATE:MICROSTRUCTURAL EVOLUTION AND MECHANICAL PERFORMANCE | Prof. A.R. Dixit |
| 19 | 18MT000472 | Golakoti Pavan | Impact and flexural strength behavior of GFRP composite laminate at various fiber Volume fractions | Prof. K. K. Singh |
| 20 | 18MT000474 | Nikhil Agrawal | Laser beam welding of super duplex stainless steel-2507 sheets | Prof.N.K Singh |
| 21 | 18MT000499 | Shiv Kumar Rajak | Comparison of the property of copper matrix composites reinforced with graphene, CNT and N-doped graphene | Prof. V Bajpai |
| 22 | 18MT000552 | GAURVENDRA PRATAP SINGH | COMPARISON OF MACHINING PARAMETER OF TI-6AL-4V IN MAKING MICRO SLOTS USING INHOUSE BUILT EDM AND ECDM MACHINE |
Prof. A.K. Das |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 18MT0029 | Pravesh Kumar Mishra | Emission Analysis of IC Engine Using Nanolubricants | Subrata Kumar Ghosh |
| 2 | 18MT0033 | Rahul Kumar | Design and Fabrication of Magneto rheological Fluid Finishing (MRF) Setup and Experimental Analysis | N K Singh |
| 3 | 18MT0080 | Rajnish Kumar Pandey | Effect of Copper Oxide nano-cutting fluid on burr formation of INCONEL-718 during micro-milling operation | N K Singh |
| 4 | 18MT0120 | Mudit Mishra | Free vibration analysis of Functionally Graded Material (FGM) plates by Dynamic Stiffness Method (DSM) using first order shear deformation theory | Md. S Azam |
| 5 | 18MT0130 | Sandeep Kumar Pal | Degradation analysis of hydraulic oil HFDU 68 used in LHD 811MKV | S Chattoapdhyaya |
| 6 | 18MT0141 | Prashant Kumar Singh | CFD approach for aerodynamic design of axial flow fan's blade. | S Chattoapdhyaya |
| 7 | 18MT0149 | Om Prakash | Performance Analysis of Modified Bio-lubricant- Advancement in Green Tribology | Subrata Kumar Ghosh |
| 8 | 18MT0176 | Banoth Uday Raj | STUDY OF BIO-MECHANICAL PROPERTIES OF DENTAL MATERIAL USED IN ART | Md. S Azam |
| 9 | 18MT0189 | Prashant Kumar | SURFACE MODIFICATION OF TITANIUM THROUGH ELECTRO CHEMICAL DISCHARGE PROCESS USING UREA ADDED ELECTROLYTE | A K Das |
| 10 | 18MT0206 | Sagar Agrahari | Reliability analysis of water based centrifugal casting machine | N K Singh |
| 11 | 18MT0211 | Shahrukh Ehtram | Oil analysis of the geared motor used in coal based rotary kiln | Subrata Kumar Ghosh |
| 12 | 18MT0253 | Navneet Kumar Singh | Surface Coating on Ti-6Al-4V alloy using TIG | A Mandal |
| 13 | 18MT0258 | Ashok Kumar | Fabrication MWCNT imbedded woven carbon fiber composite and its mechanical characterization | N K Singh |
| 14 | 18MT0307 | Anurodh Ranjan | Performance evaluation of slider thrust bearing with different inlet conditions under elastohydrodynamic lubrication regime | Md. S Azam |
| 15 | 18MT0328 | Alok Kumar | Vibration Analysis of Functionally Graded Plate in Thermal Environment | Md. S Azam |
| 16 | 18MT0350 | Abhishek Kumar Paswa | Debility nature of the 3 dimensional carbon/glass fibers composite with/without aluminum sheet under three-point bending load | P K Mahato |
| 17 | 18MT0367 | Goli Rohith | Tribological performance Analysis of SS 304 coated with Ni-P-SiC composite | Subrata Kumar Ghosh |
| 18 | 18MT0368 | Nikhil Kumar Mishra | Experimental Analysis of Indian Railway Brake Pad | Subrata Kumar Ghosh |
| 19 | 18MT0382 | Anupam Prakash | Synthesis of ZnO nanoflakes through micro EDM deposition method and its application as gas sensor | N K Singh |
| 20 | 18MT0388 | Pujari Satayprakash | EXPERIMENTAL STUDY OF TRIBOLOGICAL EFFECT ON TRANSMISSION OIL AND CLUTCH PLATE OF LOAD HAUL DUMPER. | S Chattoapdhyaya |
| 21 | 18MT0401 | Mohar Kumar | Analysis of glass/basalt fibre composite | N K Singh |
| 22 | 18MT0404 | Akhilesh Kumar Cha | Predictive maintenance of ball bearing using vibration signal | N K Singh |
| 23 | 18MT0410 | Sachin Chanabasappa | Effect of process parameters of Abrasive Water Jet machine on machining of GFRP composites | S Chattoapdhyaya |
| 24 | 18MT0430 | Suman Swaraj | Electrical discharge coating using Cu, MoS2 and hBN powder mixture for solid lubrication and enhanced triboloical properties | A Mandal |
| 25 | 18MT0437 | Ekta Gupta | The influence of the liquid column on the evaporation of a suspended drop | D K Mandal |
| 26 | 18MT0473 | Naghma Jamal | COMPOSITE COATING ON ALUMINIUM BASED ALLOY THROUGH ELECTROLESS Ni-P PLATING ROUTE | A K Das |
| 27 | 18MT0518 | Bhupendra Nonia | 3D printing of metallic Components using ARC welding | A K Das |
| 28 | 18MT0541 | Prashant Kumar | Condition monitoring and analysis of extruder gearbox using vibration signature and overhauling | P K Mahato |
| 29 | 18MT0564 | Pankaj Kumar | A Study to Coat AA1100, AA6061 and SS304 layer on Mild Steel plate by Friction Surfacing | N K Singh |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 17MT001488 | Arpan Gupta | Control of magnetic levitation system | S K Ghoshal |
| 2 | 17MT001522 | Mohd Azeem | Noise Analysis of Subway in IIT(ISM) Dhanbad | M L Chandravanshi |
| 3 | 17MT001558 | Bishnu deb bhattacharjee | Fluid structure interaction analysis of aircraft wing in supresonic regime | P K Mahato |
| 4 | 17MT001564 | Tushar Kanti Saha | Analysis of Power Hydraulic Circuit for improving energy efficiency | S K Ghoshal |
| 5 | 17MT001630 | Manish Kumar | Modelling and Simulation of an Elevator System | S K Singh |
| 6 | 17MT001646 | Hiren solanki | Development and analysis of e-glass/jute hybrid natural fibre reinforced polymer composite | P K Mahato |
| 8 | 17MT001689 | Sandeep roy | Mechanical & thermal buckling of laminated composite plate | P K Mahato |
| 9 | 17MT001721 | Ankita Shrabornee | Design feature diagnostics for improving robustness of modellers | A Mallick Jointly with Industry |
| 10 | 17MT001792 | Kartikay Kumar | Graphene-reinforced aluminum matrix composites: Synthesis and investigation of its mechanical properties | A Mallick |
| 11 | 17MT001799 | Aquib Khan | Dynamic Analysis of Column Under Generalized Boundary Conditions Through Modal Analysis | M L Chandravanshi |
| 14 | 17MT001830 | Rocky Raj Tilak | Thermal stresses in a FGM Cylinder | A Mallick |
| 15 | 17MT001837 |
Gaurav Kumar | Static analysis of functionally graded plate on elastic foundation | Md. S Azam |
| 16 | 17MT001840 | Sumanta Kumar Dutta | Fault diagnosis of a hydraulic system | S K Ghoshal |
| 17 | 17MT001841 | Ishu jain | Active vibration control of laminated composite plate using finite element method | P K Mahato |
| 18 | 17MT001886 | Rajni kant kumar | Active vibration control of piezo-laminated composite plate | P K Mahato |
| 19 | 17MT001907 | Pankaj Kumar | Thermal stress analysis in FGM rotating disk (using FEM) | A Mallick |
| 20 | 17MT001916 | Indramani | Design of porous fin | A Mallick |
| 21 | 17MT001918 | Deepak Kumar Sharma | Enhancement of mechanical properties of Copper by using Graphene Nanoplates | A Mallick |
| 22 | 17MT001941 | Sarat kumar sahoo | Finite element analysis of laminated composite plate | P K Mahato |
| 24 | 17MT001995 | Maninder Kumar | Noise Analysis of Road Side Quarter Using Different Materials | M L Chandravanshi |
| 25 | 17MT002040 | Asesh Kumar Patra | Locomotion study and dynamic analysis of inchworm robot | S K Ghoshal |
| 26 | 17MT002041 | Sourav Mishra | Enhancement of bio-mechanical properties of dental material used in ART | Md. S Azam |
| 27 | 17MT002042 | Himanshu Sekhar Sahu | Fault Detection in a gear system using Hilbert Haung Transform | S K Singh |
| 28 | 17MT002049 | Ronit kumar | Methodology development for engine mount target cascading and design optimization to achieve nvh performance attribute target | P K Mahato |
| 29 | 17MT002066 | Girish kumar singh | Development and vibration analysis of basalt fiber reinforced composite plate | P K Mahato |
| 30 | 17MT 002068 | Rahul Kumar | Modal Analysis of Sports tool Using FEM and EMA Method | M L Chandravanshi |
| 31 | 17MT002071 | Ankit Kumar | Design of Penstock using Finite Element Method and Obtain Collapse Load | S Sarkar |
| 32 | 17MT002073 | Gaurang Mital | Analysis and Design of Wind Mill Tower for Offshore and Onshore Conditions | S Sarkar |
| 33 | 17MT002078 | Sawant Bhushan Satish | Crack Detection in a shaft system using sungular value decomposition | S K Singh |
| 35 | 17MT002187 | Amit Kumar Nayak | Dynamic analysis of a railway Vehicle with degraded railway track | S K Singh |
| 36 | 17MT002253 | Jayanto Kumar Bouri | Design and Development of Micro UTM | M L Chandravanshi |
| 37 | 17MT002271 | Meet Patel | Path prediction of serpentine robot by using artificial neural network | S K Ghoshal |
| Sl. No | Admission No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 17MT001589 | Sudeep Roy |
Temperature Estimation for Thermal Management of Central Processing Unit Package | Prof. S. K. Ghosh |
| 2 | 17MT001604 | Saurava Mishra | Two-Phase flow Heat Transfer and Frictional Pressure Drop of R134a/Cuo nano-refrigerant inside a horizontal tube | Prof. R. K. Das |
| 3 | 17MT001620 | Kapil Kr. Gupta | Vapour Compression Absorption Cascade Refrigeration System | Prof. R. K. Das |
| 4 | 17MT001669 | Ajay Gupta | Design of Air-Conditioning System Using Solar Energy | Prof. R. K. Das |
| 5 | 17MT001675 | Patel Mehul Kumar | Numerical Analysis on Asterisk Type Plate Heat Exchanger using Hybrid Nanofluids | Prof. S. K. Ghosh |
| 6 | 17MT001752 | Sandeep Kumar | Experimental Investigation on the effect of compression ratio on single cylinder 4 stroke VCR Engine fueled with methanol diesel blends | Prof. S. N. Singh |
| 7 | 17MT001755 | Aman Kumar | Numerical Simulation of flow past two inclined square cylinders arranged in tandem | Prof. S. Sen |
| 8 | 17MT002095 | Vishal Solunke | Experimental study on thermal & hydraulic performace parameters of z type plate heat exchanger | Prof. S. N. Singh |
| 9 | 17MT001519 | Shilpa Sharma | Numerical Analysis on Wavy Type Plate Heat Exchanger using Hybrid Nanofluids | Prof. Subrata Kumar Ghosh |
| 10 | 17MT001549 | Vikas Kumar | Investing The Thermal Conductivity of Nanofluid in Presence of Magnetic field | Prof. P. K. Singh |
| 11 | 17MT001652 | Anand Kumar |
Kerosene drop impact on a dry stainless steel surface | Prof. D. K. Mandal |
| 12 | 17MT001718 | Rohit Kumar
Verma |
Circulation inside the evaporative emulsified drop | Prof. D. K. Mandal |
| 13 | 17MT001730 | Gauri Shankar
Prasad |
Experimental study on Heat transfer enhancement of concentric tube heat Exchanger | Prof. S. N. Singh |
| 14 | 17MT001783 | Avinash
Kumar |
Numerical investigation of two assymetric airfoils in tandem arrangement | Prof. S. Naraynan |
| 15 | 17MT001844 | Alok Kumar Sharma | Effect of taper spikes on the reductions of aerodynamic drag and heating of a spherically blunted nose cone | Prof. S. Naraynan |
| 16 | 17MT001851 | Ashish Anand | Effect of variable chord on the acoustic characteristics of a flat plate airfoil | Prof. S. Naraynan |
| 17 | 17MT001853 | Shivam Singh | Study of liquid droplet evaporation and effect of humidity on rate of evaporation | Prof. D. K. Mandal |
| 18 | 17MT002046 | Amar Kumar Sahu | Numerical Analysis on Chevron Type Plate Heat Exchanger using Hybrid Nanofluids | Prof. S. K. Ghosh |
| 19 | 17MT002050 | Harshawardhan More | Steady flow around an isolated and a pair of in-line diamond section cylinders | Prof. S. Sen |
| 20 | 17MT002051 | Vivek ranjan | Heat transfer enhancement analysis of dimple plates by convective heat transfer | Prof. Rakesh Kumar |
| 21 | 17MT002059 | Bharat Shukla | Nanofluid In Heat Pipe And Effect Of Temporal Variation Of Wick With Nanofluid | Prof. P. K. Singh |
| 22 | 17MT002060 | SundaramTripathi | Study Of Flow Maldistribution And Heat Transfer In Mini Channel Heat Sink | Prof. P. K. Singh |
| 23 | 17MT002061 | Purushottam Kumar Mishra | Study Of Thermal And Hydraulic Performance Of Air Cooled Branched Wavy Mini Channel Heat Sink | Prof. P. K. Singh |
| 24 | 17MT002084 | Manish kumar | Transient heat flux measurement form coaxial thermocouplein shock tube | Prof. Rakesh Kumar |
| 25 | 17MT002087 | Ujjwal Mohanty | Study of unconfined flow over a heated equilateral triangle | Prof. S. Sen |
| 26 | 17MT002089 | Abhishek Singh Chandel | Forced convection based heat transfer enhancement of heta sink using perforated pin fins | Prof. Rakesh Kumar |
| 27 | 17MT002090 | Rahul kumar | Heat transfer in shell and tube heat exchanger | Prof. Rakesh Kumar |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 17MT001487 | Punit Kumar Pandey | Mechanical CharacterizationOfWoven GFRP Laminates | Prof. K K Singh |
| 2 | 17MT001507 | Earick Lakra | Experimental study of minimization of burr height using cryogenic treatment | Prof. N K Singh |
| 3 | 17MT001510 | Raj Ranjan Ravi | Mechanical properties and microstructural investigation of resistance spot welding of AA 5052 and AA 6061 | Prof. N K Singh |
| 4 | 17MT001532 | Rakesh Kumar | Effects of welding parameters on microstructure and mechanical properties of two dissimilar Aluminum alloys 6063 and stainless steel welded joint by resistance spot welding. | Prof. N K Singh |
| 5 | 17MT001541 | Ravi Shankar Kumar | Friction stir welding of dissimilar metal AA1050 alloy and C11000 alloy | Prof. S Chattoapdhyaya |
| 6 | 17MT001545 | Pritam Kumar | Effect of Aluminium powder and surfactant mixed with dielectric in Electric Discharge Machining of Ti-6Al-4V | Prof. S Chattoapdhyaya |
| 7 | 17MT001550 | Niraj Kumar Kushwaha | Modelling and Simulation of crater Dimension in Electrical Discharge Machining | Prof. S Chattoapdhyaya |
| 8 | 17MT001639 | Dilip Kumar | Effect ofPly layup Sequence on Ilss of symmetric and Asymmetric GFRP Composite | Prof. K K Singh |
| 9 | 17MT001682 | Surya Pratap Singh | To study the effect of dielectric on EDM with the variation of input parameters on EN-31 steel (Die steel) | Prof. S Chattoapdhyaya |
| 10 | 17MT001709 | Abhishek Kumar | Mechanical properties and microstructural investigation of resistance spot welding of 7075 Al Alloy | Prof. N K Singh |
| 11 | 17MT001710 | Prashant Kumar Bhatiya | Establishment of the relationship of MRR and physical properties usnig buckingham pi theorem in Electrical Discharge Machinning | Prof. S Chattoapdhyaya |
| 12 | 17MT001712 | Sourav Pandey | Friction stir welding of aluminum alloys | Prof. S Chattoapdhyaya |
| 13 | 17MT001725 | Deepak Sharma | Surface modification of Ti-alloy using hBN mixed dielectric in micro-EDM | Prof.A K Das |
| 14 | 17MT001726 | Sahil Kumar Yadav | Fabrication of micro-ultrasonic machining set-up for composite materials | Prof.A K Das |
| 15 | 17MT001756 | Anumita Bharti | Fiber laser cut quality of Inconel 718 alloy and investigation of surface integrity | Prof.A K Das |
| 16 | 17MT001855 | Deepak Kumar Chaudhari | Modeling and study of ultrasonically assisted hybrid machinign process for inconel 718 with finite element analysis | Prof. V Bajpai |
| 17 | 17MT001945 | Shubham Gupta | NUMERICAL MODELLING OF ELECTRICAL DISCHARGE MACHINING PROCESS | Prof. A Mandal |
| 18 | 17MT002043 | Bantee Kumar | Investigation on mechanical and microstructural properties of Al2O3-ZnO-SS430 composite coating on SS430 by CNC assisted TIG cladding | Prof. A R Dixit |
| 19 | 17MT002048 | Priti Ranjan Panda | Arc additive manufacturing on stainless steel | Prof.A K Das |
| 20 | 17MT002052 | Anusha Roohi Siddique | Electrical discharge coating of Ti-alloy using WS2 and brass powder metallurgy electrode in micro-EDM | Prof.A K Das |
| 21 | 17MT002057 | Dheeraj Sharma | Parametric Optimization Of Surface Roughness and Delamination Damage in End Milling Operation of GFRP Laminate Modified With Nano Fillers | Prof. K K Singh |
| 22 | 17MT002064 | Viren Modi | MechanicalResponse of Multidirectional GFRP Laminates under Various Stacking Sequence | Prof. K K Singh |
| 23 | 17MT002076 | Saransh Tiwari | Investgation into the complex profiles machined by Wire Electrical discharge Turning | Prof. A Mandal |
| 24 | 17MT002091 | Anurag Yadav | Comparative study of Al2O3 micro powder mixed EDM over plain EDM using RSM technique | Prof. A R Dixit |
| 25 | 17MT002093 | Ankit Verma | Fabrication of hybrid micro-ultrasonic machine to perform experimental study on carbon fiber reinforced plastic (CFRP) | Prof. A R Dixit |
| 26 | 17MT002098 | Allen Jose | Experimental and Numerical investigation of TIG welding of Inconel 718 plates | Prof. S Chattoapdhyaya |
| 27 | 17MT002101 | Vijay Shankar Patel | Preparation of brass + copper coating layer on the mild steel substrate with the help of electrical discharge coating | Prof. A Mandal |
| 28 | 17MT002179 | Prabhash Kumar Jha | Machining of hard metals | Prof. V Bajpai |
| 29 | 17MT002219 | Vishal Kumar | Wire-arc additive manufacturing of copper coated mild steel | Prof.A K Das & Prof. A. Mandal |
| 30 | 17MT002249 | Abhinav Verma | Influence of heat treatment on dissimilar inconel 718 and SS-316 alloys TIG welded joints | Prof. S Chattoapdhyaya |
| 31 | 17MT002262 | Prasenjit Sharma | Optical characterization of copper doped lead oxide nano-particle generated through ECDM process | Prof. N K Singh |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 17MT001496 | Zishan Uddin | Codeless CAD Customization | Subrata Kumar Ghosh |
| 2 | 17MT001503 | Nagesh Dewangan | Condition Monitoring of Gear Oil SAE 90 Used in Load Haul Dumper Machine. | S Chattapadhyay |
| 3 | 17MT001512 | Nrupa Keshari Rana | Effect of Dielectric with and without powder in electric discharge machining of Inconel 825 | N K Singh |
| 4 | 17MT001599 | Brij Nandan Tripathi | EXPERT SYSTEM FOR SELECTION OF TBM USING CLIPS | S Chattapadhyay |
| 5 | 17MT001601 | Md Nausher Khan | Material Characterizations of Resistance spot welded aluminium alloy 5052 and stainless steel 316L joints | N K Singh |
| 6 | 17MT001610 | Paresh Kumar Mishra | Fault Diagnosis in Rolling Element Bearing using Cepstrum Analysis | Sachin Singh |
| 7 | 17MT001619 | Raghwesh Kumar | Performance Evaluation of single-Cylinder Four stroke Diesel Engine Employing Ceria Based Nano fluids | Subrata Kumar Ghosh |
| 8 | 17MT001664 | Subhash Kumar | Tribological Behavior of Glass/Epoxy Laminated Composite Reinforced with Graphene and MWCNT | K K Singh |
| 9 | 17MT001679 | Uday Ranjan | Experimental Investigation of Physico-Chemical Properties and Tribological Behaviour on Gear and Engine Oil. | Subrata Kumar Ghosh |
| 10 | 17MT001761 | Km. Madhulika Sharma | HYDRAULIC OIL ANALYSIS OF 811 MK V LOAD HAUL DUMPER AND APPLICATION OF 7 QUALITY CONTROL TOOLS IN THE REDUCTION OF MEAN TIME TO REPAIR OF MACHINE REBUILDING PROCESS | S Chattapadhyay |
| 11 | 17MT001791 | Dheeraj Kumar | Effect of MoS2 powder mixed into dielectric fluid on electric discharge machining of Titanium alloy | N K Singh |
| 12 | 17MT001806 | Saurabh Vashistha | Reliability and Maintainability analysis of LHD (Load, Haul and Dump) machine at Saoner Mines, Nagpur, India | S Chattapadhyay |
| 13 | 17MT001833 | Shubham Tyagi | Performance Analysis of 4- stroke Diesel Engine Employing Graphite Based Lubricant. | Subrata Kumar Ghosh |
| 14 | 17MT001845 | Subham Saha | Performance Analysis of Graphene Oxide as a Hot Forging Die Lubricant | A Mandal |
| 15 | 17MT001846 | Pritam Biswas | Mechanical and technological investigation of electroless Ni-P-B ternary coating | A R Dixit (Guide), Rashmi Ranjan Sahoo |
| 16 | 17MT001884 | Aashutosh Kumar | Computation of the peripheral velocities of a shedding drop | D K Mandal |
| 17 | 17MT002010 | Bobby Karmali | Material characterization of Al alloy and stainless steel after riveting of stainless steel in Al sheet under resistance spot welding | N K Singh |
| 18 | 17MT002085 | Dhananjay Kumar Dwivedi | Study of Tri-component droplet evaporation by using Pendant Droplet Method and SRMM | D K Mandal |
| 19 | 17MT002086 | Chiranjeevee Sinha | Material characterization of resistance spot welded Al alloy 5052 and stainless steel 316L joints | N K Singh |
| 20 | 17MT002092 | Nippu Kumar | Detection of Tool Wear using Acoustics Emission Signal | Sachin Singh |
| 21 | 17MT002096 | Vivek Kumar Singh | Experimental and numerical Studies on Additive Manufacturing of AlSi10Mg alloy. | Subrata Kumar Ghosh |
| 22 | 17MT002099 | Vikas Kumar | Dry sliding wear and friction behaviour of Ni-P-MWCNT composite Electroless coating on Mild Steel | Subrata Kumar Ghosh |
| 23 | 17MT002100 | Aditya Raj | Development and Vibration Damping Analysis of Basalt Fiber Reinforced Epoxy Composite Beams | P K Mahato |
| 24 | 17MT002106 | Aditya Pratap Singh | Friction Stir Processing of Aluminium alloy | Subrata Kumar Ghosh |
| 25 | 17MT002118 | Vishal Kumar Verma | Mechanical properties and microstructure of 7075 Al Alloy by TIG welding | N K Singh |
| 26 | 17MT002128 | Kumar Gaurav | Reliability and Maintainability analysis of Universal drill machine at Saoner Mines, Nagpur, India | S Chattapadhyay |
| 27 | 17MT002131 | Md Shahbaz | Effect of Nano SiC-Ni-P Composite elecroless coating on Tribological Behaviour of Brake Pad material | Subrata Kumar Ghosh |
| 28 | 17MT002132 | Diwakar Kumar Vidyar | Wear and debris analysis of Nano lubricant | Subrata Kumar Ghosh |
| 29 | 17MT002148 | Pappu Kumar Saw | Crack Identification by the measurement of Mechanical Impedance in a Shaft system | Sachin Singh |
| 30 | 17MT002156 | Sridhar Jena | Enhancement of Strength of Old Existing Structure Using Composite | P K Mahato |
| 31 | 17MT002161 | Shivendra Kumar | Complete Modification of Muck Discharge System of CRM-III Tandem Mill. | Subrata Kumar Ghosh |
| 32 | 17MT002164 | Govind Kumar | Plastic deformation of AlCoCrFeNi2.1 high entropy alloy under nanoindentation | Md. S Azam |
| 33 | 17MT002239 | Prabhat Kumar Prajapati | Optimization Of Tribological Behavior of CFRP Composites under dry sliding condition using Taguchi Method | K K Singh |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 16MT000738 | Anuj Ghoshwami | Development of MATLAB code for laminated composite box beam using Unified theory with lagrang expansion | P K Mahato |
| 2 | 16MT000746 | Ram Babu Gupta | Detection of crack and unbalance in a rotor system using neural network | S K Singh |
| 3 | 16MT000767 | Rohit Kumar | Development of MATLAB code for laminated composite box beam using Unified theory with Taylor expansion. | P K Mahato |
| 4 | 16MT000815 | Chandrashekhar verma | Modal analysis of composite plates. | P K Mahato |
| 5 | 16MT000816 | Shubham Kumar | Experimental vibrational analysis of delaminated composite plate | P K Mahato |
| 6 | 16MT000828 | Ankilesh Kumar | Implementation of 3D printing format 3MF in NX | S K Singh |
| 7 | 16MT000838 |
Rahul Agarwal | Vibration characteristics of functionally graded plate resting on winkler Pasternak foundation | Md. S Azam |
| 8 | 16MT000852 |
Raj kumar | Homogenized finite element analysis using RVE for computing effective elastic properties of sandwiched composite plates | P Jana |
| 9 | 16MT000870 | Subhamay Das | Fault isolation of a power hydraulic system through parameter estimation using temporal information and genetic algorithm | S K Ghoshal |
| 10 | 16MT000885 | Shiv Bhushan Shukla | Position control of a magnetic levitation system using feed forward artificial neural network based on LQR | S K Ghoshal |
| 11 | 16MT000888 | Deepankar Das | Analytical and Experimental Investigation of Generic Perforated Bias flow Liner | R N Hota |
| 12 | 16MT000902 | Anubhab Majumder | A bio-inspired climbing robot: Dynamic Modelling and prototype development | S K Ghoshal |
| 13 | 16MT000936 | Dhanwate Chetan Prakash | Development of mathematical model and analysis of pitching, bouncing and rolling for optimum ride comfortability and handling of full car with 7DOF | A Mallick |
| 14 | 16MT000956 |
Praveen Kumar | Effect of scaling parameter on free vibration of nano plate | Md. S Azam |
| 15 | 16MT000967 |
Kahane Roshan Ravindra | Design and optimization of spindle bearing system. | S Chattopadhyay |
| 16 | 16MT000998 |
Neha Sahu | Effect of cutout shapes on the buckling analysis of fuctionally graded material plate under non- linearly varying edge loads | P Jana |
| 17 | 16MT001001 |
Md Intaf Alam | Optimal design of thin walled open cross-section column for maximum buckling load | P Jana |
| 18 | 16MT001011 | Aditya Kumar Singh | Kinematic and Dynamic Study of Aircraft Arrester System | S Sarkar |
| 19 | 16MT001019 | Soumik Samaddar | Passive vibration isolation of a hydraulic device using variable inertia flywheel | S K Ghoshal |
| 20 | 16MT001045 |
Sushree Kshirabdhi tanaya | Buckling analysis of orthotropic laminated composite plates with cutouts subjected to non-linearly varying edge load | P Jana |
| 21 | 16MT001047 |
Amrendra Saha | Analysis of aircraft wing due to gust load. | P K Mahato |
| 22 | 16MT001056 |
Nitin Kumar | Ratcheting behaviour of SS 316 L steel | P K Sarkar |
| 23 | 16MT001077 |
Kumar Vikrant Singh | Thermo-Mechanical analysis of FGM Rotating Disc | A Mallick |
| 24 | 16MT001087 | Hemanta Dixit | Modelling simulation and prototype development of a bio-inspired crawling-climbing robot | S K Ghoshal |
| 25 | 16MT001096 | Prabhakar Kumar Jain | Dynamic stability of two rigid rotors connected through flexibile coupling angular misalignment | S K Singh |
| 26 | 16MT001102 | Tushar Ranjan | Design and Analysis of CLT Propellers | S Sarkar |
| 27 | 16MT001113 |
Neha Duhan Rajkumar | Modelling and Simulation of RCF crack in Rail Steel. | P K Sarkar |
| 28 | 16MT001116 |
Parvendra Singh | Effect of plate support conditions on elastic buckling behaviour of perforated plates | P Jana |
| 29 | 16MT001124 |
Sudhanshu Kumar | Low Cycle Fatigue Life prediction of SS 316L by CDM approach | P K Sarkar |
| 30 | 16MT001170 | Akash Soren | Study of an experimental setup to analyse gearbox fault and its diagnosis | S K Singh |
| 31 | 16MT001305 |
Mukesh Kumar | Performance evaluation of thrust pad bearing with different inlet conditions under thin film Lubrication | Md. S Azam |
| 32 | 16MT001308 | Soumya Kanti Mahapatra | Modelling and control of a twin rotor MIMO system | S K Ghoshal |
| 33 | 16MT001354 | Kunal Adhikary | Thermo-mechanical Analysis in Perforated Annular Fin | A Mallick |
| 34 | 16MT001377 |
Md Saquib Anis | Wear behaviour assessment of Indian Rail Steel under rolling sliding contact | P K Sarkar |
| 35 | 16MT001392 | Saurav Haldar | Design and Numerical Analysis of Acoustic filters for Broadband Noise Absorption | R N Hota |
| 36 | 16MT001401 |
Md Danish Hashmi | Fatigue damage assessment of SS 316L steel by CDM based model | P K Sarkar |
| Sl. No. | Admission No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 16MT000893 | Anjani Kumar
Singh |
Thermal Analysis of Pool Boiling for Metal Oxide Based Nanofluids. | Prof. S. K. Ghosh |
| 2 | 16MT001196 |
Sanjeet
Kumar |
Wake-induced vibrations of a circular cylinder in tandem arrangement |
Prof. S. Sen |
| 3 | 16MT001396 |
Shreedhara
Goswami |
Wake-induced oscillations of two cylinders in tandem at low mass ratio | Prof. S. Sen |
| 4 | 16MT000762 |
Devanand
Kumar |
Thermodynamic Analysis of Vapour Absorption Compression Cascade Refrigeration System | Prof. R. K. Das |
| 5 | 16MT000799 |
Deepak
Kumar |
Numerical Analysis of First and Second Law Thermodynamic Efficiency of Kalina Cycle System(KCS11) By Using Geothermal Source | Prof. R. K. Das |
| 6 | 16MT000808 |
Kshitij Kumar | Heat transfer augmentation in concentric tube heat exchanger using twisted tape | Prof. S. N. Singh |
| 7 | 16MT000811 |
Gaurav
Kumar |
Performance analysis of a chevron type gasketed plate heat exchanger | Prof. S. N. Singh |
| 8 | 16MT000846 |
Ajit Kumar
Bharti |
Heat transfer augmentation in flow passage using twisted tape under forced convection | Prof. S. N. Singh |
| 9 | 16MT000872 |
Prabhanshu
Gupta |
Experimental analysis in mixed convection over cylindrical rod with different orientation | Prof. S. N. Singh |
| 10 | 16MT001140 |
Jit Sinha |
Wake-induced vibrations of tandem circular cylinders at low Reynolds number | Prof. S. Sen |
| 11 | 16MT001184 |
Uddipta
Gautam |
Experimental and computational study of flow over flat plates and its comparison with NACA airfoil | Prof. S. Naraynan |
| 12 | 16MT001284 |
Mainak Sit |
Full Domain Simulation Of Oblique,Wavy& Branched Wavy With Water & Nanofluid In Microchannels | Prof. P. K. Singh |
| 13 | 16MT000768 |
Vivek Kumar
Mishra |
Study of Rotary Desiccant System- Using Artificial Neural Network | Prof. R. K. Das |
| 14 | 16MT000792 | Pritam
Kumar |
Wake-induced vibrations of tandem circular cylinders of different diameters | Prof. S. Sen |
| 15 | 16MT000874 | Sanjay
Kumar |
Performance Evaluation of MWCNT-SiO2 Engine Oil Based Hybrid Nanolubricants | Prof. S. K. Ghosh |
| 16 | 16MT000878 | Anuj Kumar |
Optimal Selection of Metal Oxide based Nanofluids using TOPSIS Method | Prof. S. K. Ghosh |
| 17 | 16MT000889 | Rakesh
Kumar |
CFD Analysis of a Double Pipe Heat Exchanger with Helical Wire Insert | Prof. S. K. Ghosh |
| 18 | 16MT000973 | Arif alam |
Transient Heat Flux Measurement by Coaxial Thermocouple at Stagnation Point of Spherical Nose | Prof. Rakesh Kumar |
| 19 | 16MT000987 | Barun kumar verma | Experimental Analysis of Heat Transfer Enhancement in Natural Convection Using Spherical Dimple Plate | Prof. Rakesh Kumar |
| 20 | 16MT001084 | Abhishek Jain | Effects Of Flow MaldistributionIn Single Phase Microchannel Heat Sink | Prof. P. K. Singh |
| 21 | 16MT001098 | Rakesh
Kumar |
Effect of Number of Blades on Performance of Helical DarrieusHydrokinetic Turbine | Prof. S. Sarkar |
| 22 | 16MT001121 | Vipin Kumar
Srivastava |
Performance of Vertical Axis Darrieus Hydrokinetic Turbine | Prof. S. Sarkar |
| 23 | 16MT001131 | Sumit kumar singh | Effect of Leading Nose Radius on Aerodynamic Drag Force in Subsonic Flow | Prof. Rakesh Kumar |
| 24 | 16MT001144 | Ankit Kumar |
Impact of kerosene drop on a glass surface | Prof. D. K. Mandal |
| 25 | 16MT001149 | Pramod
Pawar |
Numerical study of flow past NACA airfoils different wavy trailing edge configurations | Prof. S. Naraynan |
| 26 | 16MT001180 | Rakesh Kumar
Yadav |
Numerical investigation on performance of NACA airfoil with sawtooth serrated trailing edges | Prof. S. Naraynan |
| 27 | 16MT001201 | DevendraYadav |
Nanofluids Preparation, Characterization, Rheological Properties And ANN Modelling | Prof. P. K. Singh |
| 28 | 16MT001205 | Ankit Das |
Effect of a drop on the other for two simultaneously evaporating drops | Prof. D. K. Mandal |
| 29 | 16MT001207 | MithunSarkar |
Study Of Air Flow And Heat Transfer Characteristics On Novel Geometry Minichannel Heat Sink | Prof. P. K. Singh |
| 30 | 16MT001237 | Rahul Kumar | Effect of resting time on drop shedding from surfaces due to liquid cross flow | Prof. D. K. Mandal |
| 31 | 16MT001242 | Abhishek
Singh |
Successive water drop Impact on the different surface | Prof. D. K. Mandal |
| 32 | 16MT001274 | Roshmin
Suresh |
Effect of nose radius on the aerodynamic performance of a NACA0012 airfoil | Prof. S. Naraynan |
| 33 | 16MT001389 | AnkurShukla |
Effects Of Nanofluids On The Performance Of Heat Pipe | Prof. P. K. Singh |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 16 MT 00814 | Snehanshu Siddharth | Friction stir welding in dissimilar metal alloy | Prof. S Chattoapdhyaya |
| 2 | 16MT000257 | Himanshu Yadav | Waterjetand abrasive waterjet sufface treatment of stainless steel 304: A comparision and optimization of surface roughness and micro hardness | Prof. S Chattoapdhyaya |
| 3 | 16MT000753 | Bishwajeet | Modelling of cutting temperature in turning operation under different cutting conditions using FEM | Prof. A R Dixit |
| 4 | 16MT000760 | Brij Bhusan | Sufrace modification of Ti alloy by micro EDM using MoS2 powder mixed in dielectric. | Prof. A K Das & Prof. A.R.Dixit |
| 5 | 16MT000765 | Rohit Pratyush Behera | Mechanical Characterization Of Three Phased Glass/Epoxy Doped With MWCNTs: An Experimental Approach | Prof. K K Singh |
| 6 | 16MT000787 | Gaurav Kumar | Surface characterization, mechanical properties and thermal analysis of friction stir welding between C12200 copperand 1350 aluminum alloys | Prof. S Chattoapdhyaya |
| 7 | 16MT000788 | Arnab Das | Development of a vibration free machine structure for High speed micro milling centre | Prof. V Bajpai |
| 8 | 16MT000821 | Vinay Kumar | Comparative study of power mixed EDM and Convention EDM Using Response Surface Methodology | Prof.N K Singh |
| 9 | 16MT000841 | Anurag Nishit Kindo | Friction stir welding of AA6061-T6and AA2024-T3 and study of surface morphologies defects and temperature variation | Prof.N K Singh |
| 10 | 16MT000864 | Vishnu kumar | Sufrace modification of Ti6Al4V with WS2 powder mixed in micro EDM | Prof. A K Das & Prof. A.R.Dixit |
| 11 | 16MT000873 | Saket Saurav | Performance evaluation of graphite nano owder mixed dielectric in Electric Discharge Machining of Ti6Al4V | Prof. A R Dixit & Prof. Amitava Mandal |
| 12 | 16MT000882 | Mansi Agarwal | Comparative study for study of CFRP by milling,AWJM and laser cuttinh technique. | Prof. A K Das |
| 13 | 16MT000894 | Ankit Gupta | Processing and characterization of laser sintered hybrid B4C/cBN reinforce Ti based MMC. | Prof. A K Das |
| 14 | 16MT000896 | Sanu Kumar Singh | Effect of Temperature on Machinability of Ti-6Al-4V | Prof. V Bajpai |
| 15 | 16MT000919 | Ranjan Kumar Singh | Flexural Properties of CNT Modified GFRP Under Variable Parameters | Prof. K K Singh |
| 16 | 16MT000963 | Hari Narayan Singh Yadav | Performance investigation of WC nanoparticles synthesis through micro EDM | Prof. A K Das |
| 17 | 16MT000968 | Dhiraj Kumar | Comparative study of machining of nimonic alloy using edm oil and deionized water as dielectric | Prof. V Bajpai |
| 18 | 16MT000990 | Divit Saini | Analytical study of tribological performance of electroless coating of ni base with Al 2O3 and WS2 particles on SS304 | Prof.N K Singh |
| 19 | 16MT000990 | Divit Saini | Analytical study of tribological performance of electroless coating of Ni base with nano Al2O3 and WS2 particles on SS304 | Prof. A K Das & Prof. N.K Singh |
| 20 | 16MT001055 | Umar Arif | Analysis of wear resistant composite coating fabricated by laser cladding on Ti6Al4V surface using WS2, CNt,Ni and Ti6Al4v powder | Prof. A K Das & Prof. A.Mandal |
| 21 | 16MT001068 | Gaurav Kumar | Enhancement of Fabrication unit of an automobile industry by implementing lean manufacturing principles | Prof. A.R.Dixit & Mr. S.Patanaik,JCB |
| 22 | 16MT001100 | Deepankar Patel | Comparative study on weldability (TIG welding) of dissimilar weldment of Inconel 718 and SS 304 before and after annealing process | Prof. S Chattoapdhyaya |
| 23 | 16MT001106 | Vivek Nigam | Disintegration of rocks using abrasive water jet | Prof. S Chattoapdhyaya |
| 24 | 16MT001117 | Tanmay Tiwari | Bending of Micro thin sheets using Die Sinkig EDM | Prof. A R Dixit |
| 25 | 16MT001132 | Kshitij pandey | Sufrace modification by EDC on MS using HBN-Cu green compact electrode to improve tribological performance. | Prof. A K Das & Prof. A.Mandal |
| 26 | 16MT001145 | Mritunjay Kumar | Microstructural and mechanical properties investigation and thermal analysis of friction stir welding of AA6063 and AA1350 aluminum alloy | Prof. S Chattoapdhyaya |
| 27 | 16MT001148 | Aakash Bhattacherjee | Optical Characterization of tungsten doped cupric oxide nanoparticles produced by micro EDM | Prof. A K Das |
| 28 | 16MT001151 | Md. RafiqueRizvi | Effect ofstrain rate on flexure properties of GFRP Laminates-An Experimental and Numerical Investigation | Prof. K K Singh |
| 29 | 16MT001152 | Aanand Prakash Jaiswal | Fabrication and Characterization of Metal Matrix Nano Composite (Aluminium and graphene) | Prof. V Bajpai |
| 30 | 16MT001163 | Rahul Rakshit | Fabrication and analysis of selflubricating hBN composite coating on SS316 by laser cladding. | Prof. A K Das |
| 31 | 16MT001164 | Zishan Zaffer | TIG welding of SS304 | Prof. S Chattoapdhyaya |
| 32 | 16MT001167 | Ravi Ranjan | Development of a mathematical model for tool wear in dry machining of ti6al4v with coated cemented carbide tool | Prof. V Bajpai |
| 33 | 16MT001173 | Prashant Sagar | Thermal analysis of TIG welded Ti-6Al-4V plates using ansys | Prof. S Chattoapdhyaya |
| 34 | 16MT001179 | Deepak Taye | Electroless nickel phosphorus plating on aluminium substrate with and without nano particles suspension | Prof.N K Singh |
| 35 | 16MT001179 | Deepak taye | Electroless Nickel Phosphorus plating on Al substrate with and without nanoparticles suspension | Prof. A K Das & Prof. N.K Singh |
| 36 | 16MT001182 | Bharat TC | Synthesis of ZnO nanoparticles using ECDM process and its application in supercapicitor. | Prof. A K Das |
| 37 | 16MT001187 | Kamal Kant | FEM Modelling of Burr Size In High Speed Micro Drilling | Prof. V Bajpai |
| 38 | 16MT001245 | Bambam Kumar | Introduction to milling and micro milling | Prof. V Bajpai |
| 39 | 16MT001248 | Nitish Kumar Mahto | Surface modification through ED process using green compact electrode of Cu+MoS2 powder for engineering application. | Prof. A K Das & Prof. A.Mandal |
| 40 | 16MT001258 | Saurav Misra | Fabrication and characterization evolution of DML sintered SiC particulates reinforced Ti6Al4V MMC. | Prof. A K Das |
| 41 | 16MT001334 | Chandan Kumar | Effect ofLoading rate on Mechanical Properties and Failure By Mode I Delamination ofCFRP Laminates | Prof. K K Singh |
| 42 | 16MT001338 | Akash Deep | Effect of Nano and Macro Carbon Fillers On Mechanical Properties Of GFRP Composite | Prof. K K Singh |
| 43 | 16MT001357 | Mahendra Dilip Sukre | Experimental investigation on top burr formation in high-speed micro milling of ti6al4v alloy | Prof. V Bajpai |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 16MT000732 | VikashKumar | Volume Optimisation of Two stage helical gear train using differential evolution algorithm | Sachin Singh |
| 2 | 16MT000755 | AlokPandey | Investigation of powder mixed edm process parameters for machining nimonic 263 alloy using response surface methodology | N K Singh |
| 3 | 16MT000758 | Jiban Jyoti Kalita | Investigation On Friction and Wear Behavior of MWCNTsDoped Hybrid Fibre Reinforced Ploymer Composites under Different Environmental Conditions with Variable Parameters | K K Singh |
| 4 | 16MT000769 | Ranvijay | Experimental Study and Wear Debris Analysis of Hydraulic oil used in Tunnel Boring Machine | S Chattopadhyay |
| 5 | 16MT000786 | KumarGaurav | Effect of delivery parameters of MQL on turning operation | A R Dixit |
| 6 | 16MT000869 | AnshulJain | Study Of Tribological characteristics of three phased Carbon/Epoxy Composite Laminate reinforced with MWCNTs Under Different Sliding and Environmental Conditions | K K Singh |
| 7 | 16MT000938 | Atul Kumar Harmukh | Effct of CNT-Ni-P Composite Coating on Tribological Behaviour for Brake Pad System | Subrata Kumar Ghosh |
| 8 | 16MT001006 | Prashant Kumar Bhart | EXPERIMENTAL STUDY AND WEAR DEBRIS ANALYSIS OF GEAR OIL USED IN TBM | S Chattopadhyay |
| 9 | 16MT001044 | ShivaSingh | Thermo Tribological Behaviour of Nanofluids/Nanolubricants | Subrata Kumar Ghosh |
| 10 | 16MT001141 | RamnivasKumar | A wavelet based crack detection algorithm using normalised operating deflection shape of a rotor system | Sachin Singh |
| 11 | 16MT001176 | Vinay Krishna Sharma | Statistical Investigation of Blast Furnace Coal Feed Data Using Machine Learning and Artificial Intelligence | S Chattopadhyay |
| 12 | 16MT001238 | Chandra Prakash Sing | Synthesis Of ZnO Nanorod Using Hydrothermal Method On Carbon Fibre For Impact Analysis Of Fabricated Hybrid Composite | Vivek Bajpai |
| 13 | 16MT001254 | RanjeetKumar | DESIGN AND ANALYSIS OF A COMPACT ACOUSTIC FILTER FOR BROAD BAND NOISE ABSORPTION |
R N Hota |
| 14 | 16MT001255 | SantoshRam | FRACTURE ANALYSIS OF CUTTER RING USED IN TUNNEL BORING MACHINE | S Chattopadhyay |
| 15 | 16MT001257 | VikalpMishra | Evaporation of drops under various conditions | Deepak Mandal |
| 16 | 16MT001269 | AkhileshKumar | Dynamic Response of two rotors connected by mechanical coupling with parallel misalignment | Sachin Singh |
| 17 | 16MT001271 | AmiteshKumar | Heat Transfer Analysis of Nanofluid in a Heat Exchanger | Subrata Kumar Ghosh |
| 18 | 16MT001273 | AcricGagrai | Development of Dry EDM process at oxygen environment | Vivek Bajpai |
| 19 | 16MT001275 | Kumar Harsh Vardhan | Gas metal arc welding an optimization of parameters | N K Singh |
| 20 | 16MT001282 | Ekta Singh Shrinet | Magnetorheological Studies on Stable Suspension of Iron Oxide Nanofluids | Subrata Kumar Ghosh |
| 21 | 16MT001301 | AbhijeetRamteke | Expert system to predict TBM and cutter life of tbm in varying geological condition | S Chattopadhyay |
| 22 | 16MT001311 | SushmaBharti | Wear and Friction Behaviour of Electroless Coated Nano Al2O3-Ni-P Mild Steel | Subrata Kumar Ghosh |
| 23 | 16MT001323 | ChetanKumar | Wear Behaviour of Piston Rings in the Presence of Used Oil | Subrata Kumar Ghosh |
| 24 | 16MT001347 | Vivek Kumar | Optimum Design of Rolling Element Bearing using Differential Evolution Algorithm | Sachin Singh |
| 25 | 16MT001374 | Vikas Kumar Kaktan | Effect of Inlet condition on performance parameters of Rayleigh step bearing under thin film lubrication | Md. S Azam |
| 26 | 16MT001379 | DivyaPrakash | Experimental investigation of MRR and surface roughness in wire EDM turning. | N. K. Singh |
| 27 | 16MT001398 | AmrendraChandan | Laser transform hardening of AISIE1050 steel used for cam shaft in indian railway diesel locomotive. | A K Das |
| 28 | 16MT001469 | AdityaPandey | Mechanical and tribological behavior of graphite base aluminium metal matrix composites | Md S Azam |
| 29 | 16MT001471 | VimalMandal | Investigation on tribological behavior of atomized MWCNT mixed cutting fluid during turning operation | A R Dixit |
| 30 | 16MT001472 | RahulSharma | Effect of activating fiuxes on weld bead morphology of 304 stainless steel by flux assisted TIG welding process | N K Singh |
| 31 | 16MT001475 | NishaSharma | Wear and Frictional Study of MWCNT doped GlassFiber Reinforced Polymer Composite under different sliding conditions | K K Singh |
| 32 | 16MT001477 | Saurav Kumar Verma | To study the failure analysis of drilling Rig: Sagar kiran | N K Singh |
| 33 | 16MT001479 | Jainendra Kumar Tiwari | Experimental investigation of tbm cutter in mixed ground condition | S Chattopadhaya |
| 34 | 16MT001480 | Adesh Kumar Adesh | DETERMINATION OF BEST FIT DISTRIBUTION FORRELIABILITY OF EARTH PRESSURE BALANCE TBM | S Chattopadhyay |
| 35 | 16MT001481 | IndermaniTiwari | Study of ZDDP Additive and its Role in Lubrication | Subrata Kumar Ghosh |
| 36 | 16MT001482 | Sunali | Effect of variation of extended length on end correction in extended tube resonators | R N Hota |
| 37 | 16MT001483 | Md Meraj Uddin | Challenges associated with oil base drilling mud | N K Singh |
| 38 | 16MT001484 | SanjayKumar | Investigation of machining of inconel 825 by using powder mixed electrical discharge | N K Singh |
| 39 | 16MT001485 | Shailendra Kumar Upa | Analytical Solution for Magneto Rheological Dampers in shear mode | Md. S Azam |
| 40 | 16MT001486 | Raushan Kumar Singh | Formulation of dynamic stiffness matrix for free vibration of FG plate with or without patch mass | Md. S Azam |
| Sl No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 15MT000009 | Murtaza Ansari | Vibro-Acoustic Behaviour of Cracked Rectangular Plate. | Md. S Azam |
| 2 | 15MT000011 | Vivek Agrawal | Free vibration analysis of orthotropic rectangular thin plate with patch mass using CPT and dynamic stiffness matrix method | P K Mahato |
| 3 | 15MT000013 | Nitu Kumari | Experimental verification of acoustic properties using various methods | R.N. Hota |
| 4 | 15MT000015 | Abhinav Kumar Singh | Free vibration analysis of isotropic rectangular plate with attached point mass using classical plate theory by applying dynamic stiffness method | P k sarkar/ V ranjan |
| 5 | 15MT000018 | Roshan Kumar Choudhary | Parametric study of an open section beam for the crictical torsional buckling load | P Jana |
| 6 | 15MT000023 | Ashish Kumar | Theoretical Prediction of acoustic impedance of afterburner screech liner of a fighter jet. | R.N. Hota |
| 7 | 15MT000027 | Rahul Jangid | To formulate a ductile flow response prediction criterion. | P.K. Sarkar |
| 8 | 15MT000061 | Sanjay Prasad Verma | Design of an experimental setup to predict attenuation properties of a screech liner. | R.N. Hota |
| 9 | 15MT000067 | Pritam Mondal | Position control of a magnetic levitation system using feed forward artificial neural network | S K Ghoshal |
| 10 | 15MT000072 | Chandra Bhushan Kumar | Free vibration analysis of isotropic rectangular plate with attached patch mass using classical plate theory by applying dynamic stiffness method | A Mallick with Dr. V. Ranjan |
| 11 | 15MT000189 | Ashustosh Kumar | Free Vibration Analysis of Orthotopic Rectangular Thin Plate with Rectangular cutouts using DSM | S K Singh |
| 12 | 15MT000250 | Samir Manjhi | Buckling analysis of composite rectangular plate using ANSYS | P jana |
| 13 | 15MT000285 | Durga Prasad Patra | Experimental analysis of modal control of composite plate. | P K Mahato |
| 14 | 15MT000289 | Naveen kumar Gupta | Productivity improvements in nx: upgrading feature algorithm version and update controls to latest nx version introduction of a new functionality that is to recreate the legacy feature to the latest version of nx | P Jana//V. Ranjan |
| 15 | 15MT000297 | Deepak Sharma | Design of state observer for controlling a magnetic levitation system | S K Ghoshal |
| 16 | 15MT000304 |
Ashutosh Kumar Arya | Elastohydrodynamic Lubrication analysis of Rayleigh Step Bearing with Surface Roughness. | Md. S Azam |
| 17 | 15MT000307 |
Navadkar Amol Raghunath | Analysis of aircraft wing in subsonic regime. | P K Mahato |
| 18 | 15MT000317 |
Bikram Keshari Khandai | Shear center calculation of thin-walled beam cross-section | P Jana |
| 19 | 15MT000333 | Abhishek Bind | Model apdating: update the FEM model based on experimental analysis. | P K Mahato |
| 20 | 15MT000351 | MD. Aqueel Alam | Analytical Method for calculation of natural frequency and conveying velocity of vibrating Feeder Unit | M L Chandravanshi |
| 21 | 15MT000354 | Targe Suhas Pramod | Reconstruction of B-spline Curve by using Genetic Algorithm | K Jha |
| 22 | 15MT000359 | Lopamudra Swain | Development of a component by laser sintering and strength analysis by FEM | A Das/ PK mahato |
| 23 | 15MT000368 | Kailasa Mani D | Stability analysis of proportional derivative controlled inverted pendulum | S K Ghoshal |
| 24 | 15MT000373 | Alok Ranjan | Analysis of cracked Rotor Levitated on an AMB | S K Singh |
| 25 | 15MT000406 | Shanayrab Hayat | Design, Analysis and development of a constant volume valve | Md. S Azam |
| 26 | 15MT000424 |
Abhishek Yadav | Vibro-Acoustic Behaviour of Cracked Circular Plate. | Md. S Azam |
| 27 | 15MT000430 | Anand Pal | Thermal stresses in a rotating disk | A Mallick |
| 28 | 15MT000473 | Arbind Kumar Paswan | Detection of crack and misalignment in a rotor levitated on AMB | S K Singh |
| 29 | 15MT000485 | Jayant Prakash Varun | A comparative study on criteria for predictionof cdm based flow behaviourof metals | P.K. Sarkar |
| 30 | 15MT000491 | Aditya Kumar Nag | Performance investigation of hybrid renewable power resources | S Sarkar |
| 31 | 15MT000504 | Shridhar G R | Experimental studies on health monitoring of composite structures using paint based pzt sensors | S K Ghoshal |
| 32 | 15MT000606 | Ankit Kumar | Free vibration analysis of laminated composite plate using inverse trigonometric shear deformation theory | P K Mahato |
| 33 | 15MT000666 | Philipose M Kuriakose | Free vibration analysis of isotropic rectangular plate with uniformly distributed load using first order shear deformation theory by applying dynamic stiffness method | Md S Azam//V. Ranjan |
| 34 | 15MT000667 | Hemant Sharma | Linear quadratic control of an inverted pendulum system | S K Ghoshal |
| Sl. No. | AdmissionNo | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 15MT000381 | Ashutosh Pare | Experimental Studies of Pool Boiling Characteristics of Nanofluids. | Prof. S. K. Ghosh |
| 2 | 15MT000464 | Dhale Prashil Vinod | Performance study of Jet Plate Solar Air Heater under cross flow condition | Prof. S. N. Singh |
| 3 | 15MT000010 | Amrit Bhattacharjee | Experimental Investigation of Effect of Ethanol-Gasoline Blends on Performance of SI Engine. | Prof. S. K. Ghosh |
| 4 | 15MT000012 | Anand Kumar | Stagnation Point Transient Heat Flux Measurement Analysis at Different Angle of Attack | Prof. Rakesh Kumar |
| 5 | 15MT000014 | Raushan Kumar | Numerical and Experimental Analysis of Handmade Thin Film Gauge | Prof. Rakesh Kumar |
| 6 | 15MT000021 | Uday Kumar | Experimental investigantion of effect of Butanol Gasoline Blends on performance of SI engine | Prof. S. K. Ghosh |
| 7 | 15MT000030 | Arvind Kumar Yadav | Shedding of water drops from various surfaces | Prof. D. K. Mandal |
| 8 | 15MT000033 | Piyush Kumar Pandey | Computational study of high speed flow past a bi-conic nose cone | Prof. S. Naraynan |
| 9 | 15MT000034 | Anurag Maheswari | Numerical Simulation of flow past a flat plate airfoil with anti-singing trailing edge | Prof. S. Naraynan |
| 10 | 15MT000035 | Mukesh Kumar Mishra | Numerical Modelling Of Heat Pipe | Prof. P. K. Singh |
| 11 | 15MT000036 | Gaurav Kumar | Transient Temperature Measurement Analysis For Short Duration Using E-Type Coaxial Thermocouple | Prof. Rakesh Kumar |
| 12 | 15MT000041 | Manoranjan Kumar | Performance of Single Cylinder 4-stroke DI Diesel Engine Fueled Blends of Palm Biodiesel by addition of Nano Additives | Prof. Rakesh Kumar |
| 13 | 15MT000049 | Shanti Lata Das | Numerical Analysis Of Heat Transfer And Fluid Flow In Wavy Microchannel Using Nanofluid | Prof. P. K. Singh |
| 14 | 15MT000224 | Animesh Kujur | Characterization of various processes for a shedding drop due to water cross flow | Prof. D. K. Mandal |
| 15 | 15MT000270 | Sachin Sourav | Numerical simulation of sheat flow past an inclined square cylinder | Prof.S. Sen |
| 16 | 15MT000271 | Om PrakashPandit | Thermal Analysis Of Stress Distribution In The Vicinity Of Underground CoalGasification (UCG) Through Simulation &Modeling | Prof. P. K. Singh |
| 17 | 15MT000322 | Pritosh Kumar Chaudhari | Blade Profile Design of Cryogenic Turbine | Prof. S. K. Ghosh |
| 18 | 15MT000353 | MayaramSahu | Shedding of silicon oil drops from surfaces due to water cross flow | Prof. D. K. Mandal |
| 19 | 15MT000360 | Rakesh Ranjan | Impact of various drops on surfaces | Prof. D. K. Mandal |
| 20 | 15MT000365 | Sachindra Kumar | Numerical simulation of solar updraft tower | Prof. S. Sarkar |
| 21 | 15MT000372 | Shravan Kumar Mishra | Highly confined flow past a stationary square cylinder | Prof.S. Sen |
| 22 | 15MT000384 | Bhavna Rajput | Numerical investigation of supersonic flow past a blunted tangent ogive nose cone | Prof. S. Naraynan |
| 23 | 15MT000439 | Harish Chandra Patel | Performance investigation of diffuser augmented wind turbine | Prof. S. Sarkar |
| 24 | 15MT000445 | Amrit Kumar | Internal circulation inside various evaporating drops | Prof. D. K. Mandal |
| 25 | 15MT000449 | Gautam | Heat Transfer Performance Of Straight Channel Heat Sink For Electronic Cooling Applications | Prof. P. K. Singh |
| 26 | 15MT000496 | Lalit Kishor Verma | Experimental and Numerical Study of Heat Transfer Enhancement in the Flow Field using Spherical Dimple andd Spherical Protrusion Plate | Prof. Rakesh Kumar |
| 27 | 15MT000502 | Akash Tirkey | Impact of drops on surfaces with different wettabilties | Prof. D. K. Mandal |
| 28 | 15MT000506 | Roshni Deepika Hemrom | Performance Analysis of Savonius Hydrokinetic Turbine arranged in array corresponding to variable angular velocity of rotor | Prof. S. Sarkar |
| 29 | 15MT000618 | Navneet Varma | Computational study of Hartmann stem jet whistle in a sonic-underexpanded jet | Prof. S. Naraynan |
| 30 | 15MT000643 | Nitish Sagar | Numerical Analysis Of Heat Transfer & Fluid Flow Through Oblique-Finned Channel Using Nanofluid | Prof. P. K. Singh |
| 31 | 15MT000645 | Rajosik Adak | Free transverse-only vibrations of a thin elliptic cylinder at low Reynolds number | Prof.S. Sen |
| 32 | 15MT000703 | Dinesh Thakur | Simulation of Flow inside a heat Pipe and Thermal Performance of nanofluids | Prof. P. K. Singh |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 15 MT000038 | Ayush Chaturvedi | Effect of MQL on tool wear and surface roughness in turning operation | Prof. N K Singh |
| 2 | 15 MT000039 | Parinay Gupta | Modelling of surface roughness and tool wear in turning operation | Prof. N K Singh |
| 3 | 15MT000004 | Sonal Anand | Study of cutting temperature in turning operation under different machining environments | Prof. N K Singh |
| 4 | 15MT000028 | Shashi Suman | Finite element analysis of friction stir welding | Prof.S Chattoapdhyaya |
| 5 | 15MT000043 | Sudish Mishra | Characterization of microstructure and mechanical properties of inconel 625 sheet of Nd: Yag laser welding | Prof. N K Singh |
| 6 | 15MT000044 |
Durgesh kumar Giri | Optimization of process parameter in micro EDM drilling in Ti6Al4V superalloy. | Prof. A K Das |
| 7 | 15MT000045 | Akash Nag | Experimental Investigation and comparative study of non-conventional turning techniques on hybrid metal matrix composites | Prof. A R Dixit |
| 8 | 15MT000070 | Amrendra Kumar Yadav | Burr height prediction of ti6al4v in high- speed micro-machining by fe abaqus/explicit modeling | Prof. V Bajpai |
| 9 | 15MT000089 | Amarjeet Kumar | Characterization of microstructure of Nd-YAG laser Welding process on Inconel 625. | Prof. N K Singh |
| 10 | 15MT000184 | SAROJKUMAR | A Comparison of Performances of Conventional EDM and Graphene Nano Powder Mixed EDM for Machining Inconel 825 | Prof. A Mandal & Prof. A.K Das |
| 11 | 15MT000184 | Saroj kumar | A comparison of performances of conventional EDM and Graphene Nanopowder mixed EDM for machining Inconel 825 | Prof. A K Das |
| 12 | 15MT000202 |
Pradeep kumar Rajak | Micro bending of thin metallic sheet using Electrical Spark in liquid dielectric medium | Prof. A K Das |
| 13 | 15MT000286 | Ratnesh Raj | Effect of process parameter of WEDM on Mg based Nano composite | Prof. A R Dixit |
| 14 | 15MT000332 | Anubhav kumar Sharma | Influence of process parameters on scanning beads during laser beam treatment of Nimonic C263 alloys. | Prof. A K Das |
| 15 | 15MT000348 | Vikash Kumar | Selective Unit cell based architechures for additives Manufacturing of Porous Structures | Prof.S Chattoapdhyaya |
| 16 | 15MT000361 | Rishikesh Hiraye | Optimization of process parameters based on Taguchi - Genetic alogrithm model by abrasiv water jet technology and nozzle deformation using ansys CFD | Prof.S Chattoapdhyaya |
| 17 | 15MT000369 | Suryank Dwivedi | Investigations on microstructure & mechanical properties of dissimilar TIG welded SS316 & SS430 | Prof.S Chattoapdhyaya |
| 18 | 15MT000380 | Arghya Bagchi | Experimental study on material removal rate and surface roughness in abrasive water jet cutting of nimonic C 263 super alloy | Prof.S Chattoapdhyaya |
| 19 | 15MT000382 |
Anurag Prusty | Optimisation of fibre laser cutting parameters for better surface integrity of glass fibre reinforced plastics | Prof. A K Das |
| 20 | 15MT000402 | Ajay Tiwari | Abrasive water jet cutting of hastelloy | Prof.S Chattoapdhyaya |
| 21 | 15MT000415 | Pintu Kumar Vishwakarma | Strain Estimation Around stress Concentration in Laminated GFRP Composite | Prof. K K Singh |
| 22 | 15MT000428 | Ankit Jain | FE simulation of machining of Ti-54M titanium alloy for industry relevant outcomes | Prof. V Bajpai |
| 23 | 15MT000437 | Saneep Shukla | Modelling of spinning process without wall thickness reduction on dome formantion | Prof.S Chattoapdhyaya |
| 24 | 15MT000454 | Pankaj Kumar | Burr formation on difficult to cut metals | Prof. V Bajpai |
| 25 | 15MT000465 | Rakesh Kumar | Modal analysis of Micro Milling Machine and its parts using FEM Technique | Prof. V Bajpai |
| 26 | 15MT000471 | Shudhir Kumar | A comparative simulation of casting solidification using FEA technique | Prof. V Bajpai |
| 27 | 15MT000474 | Preeti Gautam | Experimental investigation and optimization of Laser Cutting parameters in Fiber Laser cutting of CFRP Composite | Prf. A. K. Das |
| 28 | 15MT000493 | Vineeta Bhaskar | Experimental evaluation of surface quality characteristics of laser drilled hole is GFRP composite | Prof. K K Singh |
| 29 | 15MT000605 | Shubham | Surface alloying of nickel by Micro Electric Discharge Machining | Prof.S Chattoapdhyaya |
| 30 | 15MT000621 | Sanjay Oraon | Diagnosis check in the Vibratory Feeder unit using FEA technique | Prof. V Bajpai |
| 31 | 15MT000642 | Priyea Ranjan | FE analysis of rake face texturing for improved machining | Prof. V Bajpai |
| 32 | 15MT000644 | Sudip Kundu | Laser sintered TiN reinforced Ti6Al4V alloy based MMC fabrication, characterization and performance. | Prof. A K Das |
| 33 | 15MT000646 | Surajit Mondal | Optimization of nanoparticles production rate by micro EDM using ANN | Prof. A K Das |
| 34 | 15MT000659 |
Mukul Anand | Fiber laser cutting of NimonicC263 Alloy and investigation of surface integrity. | Prof. A K Das |
| 35 | 15MT000661 |
PrakashKumar | Resistance spot welding of dissimilar material (Nickel and Titanium alloy) | Prof. A K Das |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 15MT000080 | SheebaBorkakoti | Dragline reliability and a failure analysis on dragrope | S Chattopadhyay |
| 2 | 15MT000084 | AmitGaurav | Finite element analysis effect of textured cutting tool on machining of ti-6AI-4V alloy | N K Singh |
| 3 | 15MT000087 | Anil Kumar Agrawal | Failure Analysis of Dragchain using in Dragline | S Chattopadhyay |
| 4 | 15MT000095 | AbhimanyuSharma | Wear debris analysis of transmission systems using Ferrography | Subrata Kumar Ghosh |
| 5 | 15MT000098 | MayankSharma | Effect of dry and near dry machining tool wear and chip formation mechanism | N K Singh |
| 6 | 15MT000099 | Mahendra Kumar Soni | Comparative Study of Friction and Wear Characteristics of carbon fiber reinforced epoxy composite, sliding under oil lubrication, dry sliding and inert gas environment | K K Singh |
| 7 | 15MT000103 | PrashantKumar | To study the tribological characteristics of GnP and MWCNT based Nanofluids | Amit Rai Dixit |
| 8 | 15MT000112 | SumitKumar | Rolling Bearing Fault Diagnosis using recursive Autocorrelation and Autoregressive Analysis | Sachin Singh |
| 9 | 15MT000117 | VivekYadav | Experimental analysis on Graphene and Silicon Oxide based nanolubricants | Subrata Kumar Ghosh |
| 10 | 15MT000221 | Nageshwar Kumar Das | Experimental investigation on used transmission oil of HEMM | Subrata Kumar Ghosh |
| 11 | 15MT000232 | Maneesh Kumar Rao | Study ofTribological Behavior Of (CFRP+MWCNT) MWCNT embedded CFRP | K K Singh |
| 12 | 15MT000375 | Harshal Chandrakant | Free vibration analysis of rectangular plate with attached patch mass using FSDT by DSM | P K Mahato |
| 13 | 15MT000438 | NishantSingh | Experimental Investigation of Machinability characteristics under MQL using Graphene based Nao Cutting fluid | Amit Rai Dixit |
| 14 | 15MT000444 | Annadi Ramana Reddy | Tribology characteristics of Mg based nano composite | Amit Rai Dixit |
| 15 | 15MT000475 | Mahendra Kumar Patel | Comparative study of wear and friction characteristics of carbon fibre reinforced epoxy resin, sliding under dry, oil lubricated and inert gas environments | N K Singh |
| 16 | 15MT000484 | AbhishekSharma | Investigation on tribological aspects of MWCNT mixed nano cutting fluid in machining | Amit Rai Dixit |
| 17 | 15MT000486 | Pradeep Singh Chauhan | Wear debris analysis of engine oil using Ferrography | Subrata Kumar Ghosh |
| 18 | 15MT000494 | AlokRanjan | To study failure analysis and wear analysis of a gear component by using pin on disc | S Chattopadhyay |
| 19 | 15MT000498 | PriyaPal | Evaporation of various lubricant drops inside a closed chamber | Deepak K Mandal |
| 20 | 15MT000505 | Himanshu Shekhar Gup | Laser surface hardening of SAE8620 HVD material for transmission gear | A K Das |
| 21 | 15MT000507 | Ashish Kumar Ojha | Experimental investigation on usedengine oil of HEMM | Subrata Kumar Ghosh |
| 22 | 15MT000509 | Prashant Kumar Sahu | Reliability modelling and performance analysis of dragline for improving productivity and maintenance planning. | S Chattopadhyay |
| 23 | 15MT000510 | NaweshKumar | To study wear analysis of bucket tooth used in dragline. | S Chattopadhyay |
| 24 | 15MT000511 | RahulGautam | Wear analysis of a power cylinder piston unit for optimized equipment maintenance using ANSYS and OPTISLANG | Shibayan Sarkar |
| 25 | 15MT000516 | Mohit Dharmeshbhai M | Investigation of tribological behavior of slurry pump | Shibayan Sarkar |
| 26 | 15MT000519 | Md Mahtab Sabri | Elastohydrodynamic Lubrication analysis of Journal Bearing with Surface Roughness. | Sinkandar Azam |
| 27 | 15MT000521 | SandeepSharma | Free vibration analysis of rectangular plate with cutout using CPT | P K Mahato |
| 28 | 15MT000522 | PranamiRajkhowa | Reliability and failure analysis of the critical component of the dragline | S Chattopadhyay |
| 29 | 15MT000523 | Shanti Priya Vatsh | A study on the durability of surfaces from the drop shedding perspective | Deepak Mandal |
| 30 | 15MT000615 | KumarAniket | Analysis of resonant characteristics of high speed train passing through simply supported bridge | Sachin Singh |
| 31 | 15MT000664 | Mudit Kumar Singh | Analysis of material removal rate and surface roughness in wire-cut EDM of Al 2219 alloy | N K Singh |
| 32 | 15MT000665 | Gaurav Kumar Suman | Optimization of wire EDM process parameters for surface roughness and MRR in machining ofmild steel | N K Singh |
| 33 | 15MT000721 | SantoshKumar | Experimental analysis of Copper Oxide and Silicon Oxide based Nanolubricant | Subrata Kumar Ghosh |
| 34 | 14MT000538 | Sumit Kumar | Bearing Fault Analysis using Vibrational Signal | Sachin Singh |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 14MT000020 | Prashant Kumar Choudhary | FEM for Vibro- acoustics of plates | Dr. Vinayak Ranjan |
| 2 | 14MT000028 | Benjamin Raju | Analysis of composite aircraft wing due to air load in subsonic regime | P K Mahato |
| 3 | 14MT000034 | Kunal Singh | Stress Sensitivity Analysis of A Gas Turbine Compressor Disc and Blade Dovetail | S Sarkar External guide Mr. S. Ashok Babu, Sc F, GTRE, DRDO |
| 4 | 14MT000051 | Md. Salim Ahmad | Detection of crack in a Jeffcot Rotor using AMB current Signature | S K Singh |
| 5 | 14MT000053 | B V Mathew | A study about measurement of acoustic properties of a material using two-load method with the help of transfer matrix method | R N Hota |
| 6 | 14MT000055 | Asutosh Tripathi | The absorption of sound by perforated linings | R N Hota |
| 7 | 14MT000057 | Arpan Mishra | Spectral Subtraction Method for Fault Detection in Rolling Element Bearing | S K Singh |
| 8 | 14MT000066 | Adnan Ahmad | Detection of crack in a Jeffcot Rotor Lavitated on an AMB | S K Singh |
| 9 | 14MT000070 | Lunu Saikia | Analysis of acoustic properties and performance of a screech liner | Dr. R. N. Hota |
| 10 | 14MT000082 |
Patil Lokesh Rajendra Singh | Non Linear Dynamics of Bolted Disc Drum Joint in Rotor. | Md. S Azam |
| 11 | 14MT000084 |
Md. Zahid | Vibration Analysis of Cracked Rectangular Plate coupled with Water. | Md. S Azam |
| 12 | 14MT000122 |
Rituraj Soni | Free Vibration Analysis of Rectangular Nano Plate. | Md. S Azam |
| 13 | 14MT000127 | Satish Kumar | Failure Analysis of Shovel Tooth | S Sarkar |
| 14 | 14MT000130 |
Priyanka Lalam | Enhancing Air Flow Restriction Prediction of a Generator | Md. S Azam |
| 15 | 14MT000203 | Rupesh Singh | ON THE DYNAMIC CONDITIONS RESPONSIBLE FOR WHEEL- RAIL DERAILMENT | Prof. P.K. Sarkar |
| 16 | 14MT000228 | Aniket Sahai | Dynamic analysis and control of wall climbing robot | S K Ghoshal |
| 17 | 14MT000233 | Mohit K. Verma | Study the effects of roughness caused by wheel rail defects on the dynamic behavior of wheel rail contact Computation Required: MATLAB + SIMULINK | Prof. P.K. Sarkar |
| 18 | 14MT000271 | Prince Oliver Horo | Synthesis and characterization of Aluminium composite | Dr. Ashis Mallick |
| 19 | 14MT000351 | Sandeep Singh | STUDY ON RAIL CORRUGATION: ITS CAUSE AND EFFECT EVALUATION |
Prof. P.K. Sarkar |
| 20 | 14MT000355 | Ashok Deshukh | FEM for Assistive Technology for disabled | Dr. Vinayak Ranjan |
| 21 | 14MT000363 | Rajat Tripathi | Design of Wind Turine | S Sarkar |
| 22 | 14MT000373 | Vishal Mane | FEM for Railway dynamics | Dr. Vinayak Ranjan |
| 23 | 14MT000382 | Ranjan Kumar | Thermal stresses in an annular fin of hyperbolic profile | A Mallick |
| 24 | 14MT000385 |
Md. Touhid Alam Ansari | Vibration Analysis of Stationary and Rotating Plate with Crack. | Md. S Azam |
| 25 | 14MT000387 | Mr. Surya Deka | Thermal stresses in a functionally graded rotating disk | A Mallick |
| 26 | 14MT000389 | Sumit Bhowmik | MODELLING AND ANALYSIS OF CREEPAGE, CREEP FORCESAND MOMENT IN WHEEL-RAIL CONTACT | Prof. P.K. Sarkar |
| 27 | 14MT000423 | Sushil Kumar Singh | Acoustic Validation Of Helmholtz Resonator At High Frequency | R N Hota |
| 28 | 14MT000495 | Suja Goswami | ON THE MODEL ANALYSIS OF BI-LEVEL AUTO-CAR WAGONTYPE BCACBM | Prof. P.K. Sarkar |
| 29 | 14MT000506 | Shadab Ahmad | Identification of multiple cracks in a stepped shaft system | S K Singh |
| 30 | 14MT000513 | Shruti Sachan | ACOUSTICS LINER DESIGN FOR JET ENGINE | R N Hota |
| 31 | 14MT000526 | Acshay Jee Bhosle | Analysis of full aircraft model in subsonic regime | P K Mahato |
| 32 | 14MT000530 | Venkata Ravi Kiran Meesala | ON TEMPERATURE EVOLUTION IN RAIL-WHEEL ROLLING CONTACT |
Prof. P.K. Sarkar |
| 33 | 14MT000536 | Amit Belung | DUCTILEFRACTURE BEHAVIOUR OF 20MnMoNi55 STEEL | Prof. P.K. Sarkar |
| 34 | 14MT000555 | Monalisa Das | Development of CST element for FEM analysis. | Dr. Kailash Jha |
| 35 | 14MT000562 | Raj Bahadur Bharti | Vibration control of delaminated composite plate | P K Mahato |
| 36 | 14MT000567 | Dev kumar | Buckling analysis of composite plate with random material properties | P K Mahato |
| 37 | 14MT000601 | Supratim Bhattacharjee | FEM for Vibro- acoustics of piezoelectric materials for energy harvesting | Dr. Vinayak Ranjan |
| Sl. No | Admission No | Name of the candidate | Title of the Thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 14MT000003 | Amit Kumar Singh | Flow around elliptic and truncated circular cylinders | Prof. S. Sen |
| 2 | 14MT000022 | Vikas Kumar | Exergy Analysis of a Thermal Power Plant | Prof. Rakesh Kuma |
| 3 | 14MT000026 | Santosh Kumar | Numerical simulation of supersonic flow past a cylindrical bluff body | Prof. Rakesh Kuma |
| 4 | 14MT000043 | Arnab Samanta | Computational study of partially covered Hartmann whistle in a sonic underexpanded jet | Prof. S. Naraynan |
| 5 | 14MT000059 | Rajeeb Kumar Upadhyay | A comparative analysis of fuel properties and performance parameter of 4- stroke direct injection (DI) diesel engine using two blends of palm biodiesel (PB) and tyre pyrolysis oil (TPO | Prof. Rakesh Kuma |
| 6 | 14MT000061 | Ambuj Kumar | Modeling of Nano-particle Migration in pipe flow through Eulerian-Lagrangian approach. | Prof. Rakesh Kuma |
| 7 | 14MT000091 | Krith Prakash | Investigations on jet flow interactions with a conical cavity | Prof. S. Naraynan |
| 8 | 14MT000115 | Mohit Kumar | Investigation of Dynamic behaviour of fluid in pipe Network | Prof. S. Sarkar |
| 9 | 14MT000194 | Sudhir Kumar | CFD Analysis of GM type Double Inlet Pulse Tube Refrigerator | Prof. S. K. Ghosh |
| 10 | 14MT000223 | Ramesh Kumar Biswakarma | Free transverse-only vibrations of a square cylinder | Prof. S. Sen |
| 11 | 14MT000224 | Sujit Kumar | Computational study of sonic underexpanded jet impinging on a thin lipped cylindrical Hartmann resonator | Prof. S. Naraynan |
| 12 | 14MT000356 | Dheeraj Kumar Das | Flow past a circular cylinder with and without rotation | Prof. S. Sen |
| 13 | 14MT000360 | Pavan Kumar Yadav | Flow past an inclined square cylinder | Prof. S. Sen |
| 14 | 14MT000376 | Lukesh Kumar Mahato | Recirculating flow in straight and curved cavities | Prof. S. Sen |
| 15 | 14MT000383 | Prashant Srivastava | Experimental Analysis of Nano Fluid for Advance Heat Transfer Application | Prof. S. K. Ghosh |
| 16 | 14MT000392 | Kundan Kishore Jha | Study of jet impinging on a stepped cavity | Prof. S. Naraynan |
| 17 | 14MT000399 | Sachin Sharma | Damped free vibrations of a square cylinder | Prof. S. Sen |
| 18 | 14MT000402 | Tarun Kumar | Theoretical Analysis of GM type Double Inlet Pulse Tube Refrigerator | Prof. S. K. Ghosh |
| 19 | 14MT000532 | Monalisa Barla | Design of Savonius Hydrokinetic Turbine | Prof. S. Sarkar |
| 20 | 14MT000551 | Pankaj Kumar | Design of Penstock | Prof. S. Sarkar |
| 21 | 14MT000047 | Himanshu Sharma | Experimental investigation on vcr engine | Prof. S. N. Singh |
| 22 | 14MT000371 | Raj Amrit Mohapatra | Design, fabrication and static calibration of thin film gauge (TFG) for short duration transient measurement | Prof. Rakesh Kuma |
| 23 | 14MT000436 | Avhinash Kumar | Performance analysis of Darrieus Hydrokinetic Turbine | Prof. S. Sarkar |
| 24 | 14MT000006 | Pawan Kumar | Design fabrication and static calibration of coaxial thermocouple for short duration transient measurement | Prof. Rakesh Kumar |
| 25 | 14MT000022 | Vikas Kumar | Exergy Analysis of A Thermal Power Plant | Prof. R. K. Das |
| 26 | 14MT000026 | Santhosh Kumar | Simulation of supersonic flow past a cylindrical bluff body | Prof. S. Naraynan |
| 27 | 14MT000064 | Chandra Bhusan | Experimental investigation of double pass solar air heater | Prof. S. N. Singh |
| 28 | 14MT000068 | Sanjeev Kumar | Experimental investigation of performance for plane surface plate type heat exchanger using hot distilled water and cold tap water as working fluid | Prof. S. N. Singh |
| 29 | 14MT000173 | Ankur L Bando | Comparative Analysis of Some Important Refrigerants | Prof. R. K. Das |
| 30 | 14MT000194 | Sudhir Kumar | CFD Analysis of GM type Double Inlet Pulse Tube Refrigerator | Prof. Subrata Kumar Ghosh |
| 31 | 14MT000383 | Prashant Srivastava | Experimental Analysis of Nano Fluid for Advance Heat Transfer Application | Prof. Subrata Kumar Ghosh |
| 32 | 14MT000395 | Rakesh Kumar | Experimental investigation of jet plate solar air heater | Prof. S. N. Singh |
| 33 | 14MT000402 | Tarun Kumar | Theoretical Analysis of GM type Double Inlet Pulse Tube Refrigerator | Prof. Subrata Kumar Ghosh |
| 34 | 14MT000427 | Sarvesh Yadav | Experimental investigation of the natural convection from inclined heated cylindrical tube in air filled cavity | Prof. S. N. Singh |
| 35 | 14MT000545 | Vinayak Sudalai | Steady-State Modelling of Vapour Adsorption Refrigeration System | Prof. R. K. Das |
| 36 | 14MT000602 | Ratul Halder | Numerical Modelling of Adsorption Desorption System by Desiccant Wheel | Prof. R. K. Das |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 14MT000135 | Pramod Kumar Mahato | Fabrication of cylindrical micro tools by u ECM process and analysis of the cylindrical length | Prof. N.K Singh |
| 2 | 14MT000549 | Ravi Ranjan Kumar | Review of electrochemical machining on grey cast iron | Prof. N.K Singh |
| 3 | 14MT000029 | Kanhaiya Saw | Experimental investigation of Nd:YAG laser welding of Inconel 617 | Prof. S Chattoapdhyaya |
| 4 | 14MT000036 | Vikas Kumar | Fabrication of MMC by DMLS- Characterization and optimization using RSM. | Porf. A.K Das |
| 5 | 14MT000052 | Dharmendra Kumar Prasad | Mechanical characterization and defects analysis of T-joint friction stir welded samples of aluminum alloy 6101-T6 | Prof. S Chattoapdhyaya |
| 6 | 14MT000067 | Rachit Ranjan | Investigation of effect of Nano Particles Mixed dielectric in EDM | Prof. A.R. Dixit |
| 7 | 14MT000069 | Shabbir Ali | Experimental investigation of temperature distribution and surface roughness for cutting aluminum-19000 and stain less steel 304 using plasma arc cutting | Prof. S Chattoapdhyaya |
| 8 | 14MT000075 | Prabhat Kumar | Detailed investigation of microstructures and mechanical properties of inconel 617 sheet of fiber laser welding | Prof. S Chattoapdhyaya |
| 9 | 14MT000081 | Gyan Setu | Indian Railway Track Analysis For Displacment And Vibration Pattern Estimation | Prof. P.K. Sarkar |
| 10 | 14MT000094 | Shivam Agarwal | Tribo-Mechanical Characterizations Of Spark Plasma Sintered Silicon Carbide | Prof. K. K. Singh |
| 11 | 14MT000107 | Suvendu Banerjee | Composites: Effects Of Short Carbon Fibre Reinforcement | Prof. A.R. Dixit |
| 12 | 14MT000132 | Mohan Kumar | Experimental analysis of fabrication of microtool by electrochemical micromachining | Prof. N.K Singh |
| 13 | 14MT000139 |
Harish Bishwakarma | Synthesis of silver oxide nano particles through ECDM process. | Porf. A.K Das |
| 14 | 14MT000166 | Vijay Mandal | Development of TiN particulate reinforced SS316 MMCs through DMLS process and its characterization. | Porf. A.K Das |
| 15 | 14MT000167 | Sakti kumar | Experimental Investigation on surface roughness, tool wear and cutting force during Turning operation under Dry and MQL machining conditions | Prof. A.R. Dixit |
| 16 | 14MT000236 | Kamlesh Paswan | Comparision of Dionized water and EDM oil using as a dielectric medium for surface roughness, tool wear and material removal rate in Die sinking EDM | Prof. A.R. Dixit |
| 17 | 14MT000249 | PANIT DAS | DEVELOPMENT OF CYLINDRICAL WIRE ELECTRIC DISCHARGE TURNING AND ANALYSIS THE EFFECT OF PROCESS PARAMETERS ON TURNING OF STAINLESS STEEL SS304 | Prof. Amitava Mandal |
| 18 | 14MT000252 | SHAKUNTALA HEMBRAM | PREDICTION OF OPTIMAL CONDITIONS FOR WEDM MACHINING PROCESS OF INCONEL ALLOY USING DFA & TLBO | Prof. Amitava Mandal |
| 19 | 14MT000261 | ANIL HEMBRAM | INVESTIGATING THE SURFACE INTEGRITY OF INCONEL ALLOY MACHINED BY WEDM MULTI CUT STRETEGY | Prof. Amitava Mandal |
| 20 | 14MT000354 | Avinash Juriani | Optimization of machining parameters with tool insert selection for S355J2G3 material using taguchi and MADM methods | Prof. S Chattoapdhyaya |
| 21 | 14MT000374 | Vipin Kumar | Experimetal investigation of heat analysis, microstructure and mechanical properties of Ti G-5 alloy welded by TIG welding | Prof. S Chattoapdhyaya |
| 22 | 14MT000384 | Subham Kumar Yadav | Critical analysis of mechanical properties and microstructure of TIG welded Ti6Al4V alloy of Ti sheet | Prof. S Chattoapdhyaya |
| 23 | 14MT000404 | Amit Saini | Effects of build orientation and heat treatment parameters on microstructure and mechanical properties of Ti-6AI-4V alloy | Prof. N.K Singh |
| 24 | 14MT000406 | SUBHASH CHANDRA JHA | Experimental Invetigation of cutting parameters during turning of EN 24 steel | Prof. Amitava Mandal |
| 25 | 14MT000409 | Ajit Kumar | Experimental investigation of tensile properties using miniature samples and implementation for laser additive manufactured aisi 304l material | Prof. N.K Singh |
| 26 | 14MT000413 | Sachindra Shankar | Study of surface morphologies, defects and mechanical property of AA6101 using friction stir welding (Lap joint) | Prof. S Chattoapdhyaya |
| 27 | 14MT000414 | JITENDRA KUMAR SINGH | INVESTIGATION ON THE PERFORMANCE CHARACTERISTICS OF FIBRE LASER CUTTING ONINCONEL-625 SHEET | Prof. Amitava Mandal |
| 28 | 14MT000418 | Divya Khare | AN Investigation of quality in Fiber Laser Cutting of A359/Al2O3/B4C-MMC | Prof. A.R. Dixit |
| 29 | 14MT000520 | Divya Kushwaha | Experimental investigation of fabrication of micro tool by micro-electrochemical discharge machining process | Prof. N.K Singh |
| 30 | 14MT000525 | Madhusmita Mohanta | Dynamic Analysis Of Rail On Elastic Foundation | Prof. P.K. Sarkar |
| 31 | 14MT000533 | Akshay Kumar Singh | Experimental and Numerical Characterization Of Glass Fibre Reinforced Polymer (GFRP) Composite Laminates | Prof. K. K. Singh |
| 32 | 14MT000537 | RAJESH RANJAN RAVI | INVESTIGATION OF THE TOOL WEAR CHARACTERISTICS IN WIRE EDM PROCESS | Prof. Amitava Mandal |
| 33 | 14MT000543 | Kundan Kunar | EXPRIEMENTAL STUDY OF TOOL VIBRATION IN TURNING OPERATION WITH RIGID AND FLEXIBLE WORKPIECE | Amitava Mandal &M.L. Chandravanshi |
| 34 | 14MT000544 | NIKESH HEMBRAM | INVESTIGATION OF PROCESS PARAMETERS IN FIBER LASER METAL SHEET BENDING | Prof. Amitava Mandal |
| 35 | 14MT000379 | Rashi Tyagi | Analysis and characterization of fibre laser cladding of TiN powder on SS304 substrate. | Porf. A.K Das |
| 36 | 14MT000521 | Deepak kumar | Synthesis and characterization of nickel nanoparticle using micro EDM. | Porf. A.K Das |
| 37 | 14MT000558 | Madhusmita Mallick | Statistical Analysis method for optimization of machining parameters on ONA-F35 wire EDM machine for machining Ti-834 components. | Porf. A.K Das |
| 38 | 14MT000563 | Abhijeet Sethi | Evaluation of surface integrity of the features machined through ultrasonic vibration assisted micro EDM process. | Porf. A.K Das |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 2014MT0102 | Amit Kumar Rai | Mechanical Characterization Of GFRP Laminate Reinforced with Short Carbon Fibre Fillers Under ILss Test and 3-Point Bend Test | K K Singh |
| 2 | 2014MT0121 | Nilanshu Banerjee | Effects of different materials, damping factor and aspect ratio on radiation efficiency of simply supported isotropic rectangular thin plate using Rayleigh integral approach | Vinayak Ranjan |
| 3 | 2014MT0124 | Sumit Sourav | Vibration analysis of flank wear in face milling | Sachin Singh |
| 4 | 2014MT0143 | Vivek Sharma | Hybrid Film Lubrication in Hydrodynamic Journal Bearings with Deterministic Surface Roughness. | Md. S Azam |
| 5 | 2014MT0144 | Anay Arun | Tribological Behaviour of Glass Fibre Reinforced Polymer (GFRP) composites Sliding Under Dry, Oil Lubricated & Inert Gas Environmental Conditions | K K Singh |
| 6 | 2014MT0147 | Abhishek Haldar | Experimental and analytical studies of cuo based nanofluid | Subrata Kumar Ghosh |
| 7 | 2014MT0153 | Uttam Kumar Tiwary | Detection of tool wear using accoustic emission technique | Sachin Singh |
| 8 | 2014MT0157 | Mritunjay Kr Tiwari | Analysis of root flange wear in wheel profile of 1676 mm gauge locomotive wheel of Indian Railway | N K Singh |
| 9 | 2014MT0159 | Priyatash Raha | Theoretical and Experimental Studies of Spike Parameter | Subrata Kumar Ghosh |
| 10 | 2014MT0177 | Poonam Kumari | Finite element modelling and analysis of damage detection in concrete beam using piezoelectric patches | Vinayak Ranjan |
| 11 | 2014MT0182 | Rajeev Kumar | Wear debris analysis of transmission oil | Subrata Kumar Ghosh |
| 12 | 2014MT0197 | Bhabani Ranjan Pal | Numerical analysis of wear in excavator bucket using DEM & FEM | Subrata Kumar Ghosh |
| 13 | 2014MT0207 | Sanjay Kumar Singh | Crack detection of cantilever beam using ANN | P K Mahato |
| 14 | 2014MT0217 | Debayan Mandal | Stochastic Approach for The Selection of The Best Fit Distribution for Characterizing the Failure Pattern Of Economisers Along With Their Ram (Reliability Availability & Maintainability) Investigation | S Chattopadhyaya |
| 15 | 2014MT0253 | Pawan Kumar Singh | Experimental of Studies of Wear for Implant Material Under Dry Sliding Conditions | Subrata Kumar Ghosh |
| 16 | 14MT000425 | Saurabh Singh | Study Of Tribological Behaviour of Aluminum Metal Matrix Composites under Dry and Lubricated Environment | K K Singh |
| 17 | 14MT000426 | Y Vidisha | Development of multidimensional condition based monitoring system with prognosis | A K Das |
| 18 | 14MT000435 | Praveen Kumar | Comparative Study of Tribological behavior Of Clutch Friction Plate Of Heavy Vehicle With Glass Fiber Reinforcement Polymers (GFRP) Laminate Under Dry and Lubricated Condition | K K Singh |
| 19 | 14MT000439 | Chandan Pandey | Active vibration control of Piezo-laminated cantiliver beam | P K Mahato |
| 20 | 14MT000444 | Souvik Dey | Pulse current electro-deposition ofNi-AL2O3-WS2composite coating and study of its tribological properties | A K Das |
| 21 | 14MT000445 | Guru Dutt Singh | Electroless coating of Ni-Al2O3-WS2 and its tribological characterization | A K Das |
| 22 | 14MT000450 | Soumyajit Mojumder | Experimental study of wear for Implant materials under lubricated conditions | Subrata Kumar Ghosh |
| 23 | 14MT000469 | Anurag Jha | Failures of transformers in power system using the poisson distribution | N K Singh |
| 24 | 14MT000476 | Ankush Chandak | Optimisation of Friction Dampers for Turbine Blade Vibrations | S Sarkar/Dilip Kumar and Mr. Sanjay Barad |
| 25 | 14MT000486 | Debojyoti Halder | Analytical Solution for Magneto Rheological Dampers for Different Flow Modes. | Md. S Azam |
| 26 | 14MT000535 | Manish Kr Thakur | Characterization of Wear Particles by Fractal Method | Subrata Kumar Ghosh |
| 27 | 14MT000541 | Vishwajeet Ranjan | Model parameter estimation and active vibration control of cantilevel beam | P K Mahato |
| 28 | 14MT000542 | Ravindra Kumar | Experimental and Analytical studies of Al2O3 based nanofluid | Subrata Kumar Ghosh |
| 29 | 14MT000561 | Ravi Kumar | Optimization of laminate sequence of a composite plate | P K Mahato |
| 30 | 14MT000566 | Abhishek Kumar | Online tool wear prediction in milling operation using feed motor current signal | Sachin Singh |
| 31 | 14MT000568 | Karthikeyan D | Electrical Discharge Coating of Mixture of Tungsten Disulphide and Copper Powder on SS304 Stainless Steel Surface | A K Das |
| 32 | 14MT000571 | Deeksha Srivastava | Production of Hard and Wear Resistant Coating on SS304 through Laser Surface Engineering | A K Das |
| 33 | 14MT000583 | Shiv Kumar | Wear-debris detection and analysis techniques for lubricant-based condition monitoring | N K Singh |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 2013MT0012 | Vivek Koul | Analysis of Erosion behaviour in Ball and butterfly Valves at different opening Angles | S Sarkar |
| 2 | 2013MT0055 | Sinchan Mondal | Analysis of composite plate and smart damper. | P K Mahato |
| 3 | 2013MT0085 | VIKASH CHAUHAN | Analysis of Critical Stress and Loading Conditions for Involute Spur Gear | Rakesh Kumar |
| 4 | 2013MT0114 |
Mukesh Kumar | Vibration Analysis of Functionally Graded Rotating Disc. | Md. S Azam |
| 5 | 2013MT0121 | KUMAR SAKET | Experimental model analysis of stool | M L Chandarvanshi |
| 7 | 2013MT0268 | Abhay Gupta | Bending analysis of shear deformable circular plates | A Mallick |
| 8 | 2013MT0282 | SURBHI JAIN | Analysis of critical stress and loading condition for planetary gears | Rakesh Kumar |
| 9 | 2013MT0290 | RANJAN KUMAR | Finite Element Analysis of disc blade assembly region of an aero engine | Vinayak Ranjan |
| 10 | 2013MT0293 | Gaurav Kumar Yadav | Simulation of an Urban water Distribution Pipe Network and its modification corresponding to Increasing Future Demand | S Sarkar |
| 11 | 2013MT0294 | PRATEEK BAHL | Study of Acoustic Attenuation Characteristics of a Screech Liner used in Jet Engines | R N hota |
| 12 | 2013MT0296 | WASIM UDDIN | Stress analysis of feed beam of different cross section of drill rig under different loading conditions | Vinayak Ranjan |
| 13 | 2013MT0316 | FIROZ AHMAD | Optimization of of Rotary Head Gear Box | Vinayak Ranjan |
| 14 | 2013MT0324 | Aditya Prakash Yadav | Thermal stress analysis of an annular fin with variable thermal conductivity using FEM | A Mallick |
| 15 | 2013MT0344 | Lokendra Singh | Buckling Analysis of Plate Resting on Elastic Foundation. | Md. S Azam |
| 16 | 2013MT0351 | DEBADATTA SETHY | Non-linear dynamics by fractional order approach | S K Ghosal |
| 17 | 2013MT0366 | NIKHIL KUMAR | Study of Perforated Liner with Bias Flow as an Acoustic Damper | R N hota |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 13MT00008 | Siddhartha Sankar Sahoo | Reduction of front side foor closing effort by optimization of door primary seal characterization | Prof. A.R. Dixit |
| 2 | 13MT00042 | Gulshad Nawaz Ahmad | Joining of Ti-6AI-4V alloy sheets using fiber laser | Prof. N.K. Singh |
| 3 | 13MT00053 | Sonam Tiwari | Investigation on removal of recast layer formed during WEDM process | Prof. A.R. Dixit |
| 4 | 13MT00057 | Anirban Chanddar | Reduction of rear side foor closing effort by optimization of door primary seal characterization | Prof. A.R. Dixit |
| 5 | 13MT00095 | Vikash Kumar | Fiber LASER welding of thin Nickel sheet in air and water medium | Prof. A.K Das (Prof. N.K. Singh -Co Guide |
| 6 | 13MT00097 | JISHNU PADMAN | INVESTIGATION ON FRICTION STIR WELDING OF 6061 ALUMINIUM ALLOY | Prof. Amitava Mandal |
| 7 | 13MT00102 | Deepak Kumar | Optimization of various parameters of Die-Sinking EDM for making high aspect ratio vavity on tool steel | Prof. A.R. Dixit |
| 8 | 13MT00106 | Ranjan Kumar | Study of Interlaminar Toughness of CNT Embedded GFRP Laminates | Prof. K.K. Singh |
| 9 | 13MT00287 | Avadh Kishore Prasad | INVESTIGATION INTO FIBER LASER CUTTING OF STAINLESS STEEL SS304 | Prof. Amitava Mandal |
| 10 | 13MT00298 | Prabhakar Umar Jha | A study on surface coating processes on different base metals and its qualification through testing | Prof. N.K. Singh |
| 11 | 13MT00300 | Pragya Saxena | Experimental Study and Analysis of Buckling Behaviourof Composite Laminates | Prof. K.K. Singh |
| 12 | 13MT00323 | Ashish Kumar | Rupture failure analysis and mechanical strength of wire electrode in wire EDM | Prof. N.K. Singh |
| 13 | 13MT00335 | Milli Suchita Kujur | Production of Nanoparticles through ECSM | Prof. A.K Das (Prof. N.K. Singh -Co Guide |
| 14 | 13MT00355 | Deepak Suna | Parameter optimization of micro-ECM process using teaching learning based optimization algorithm | Prof. N.K. Singh |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 2013MT0088 | Niharika Gupta | Lubricating oil analysis of coal mining equipment using analytical ferrography method | Subrata Kumar Ghosh and S Sarkar |
| 2 | 2013MT0091 | Anshu Kumar Jha | Electroless coating of mild steel substrate by nickel phosphorus-tungsten | A K Das |
| 3 | 2013MT0093 | Rahul Kumar | Numerical Study of Thermo-Hydrodynamic and Thermo-Elastohydrodynamic Lubrication with Surface Waviness. | Md Sikandar Azam |
| 4 | 2013MT0111 | Keshav Kumar | Free vibration analysis of functionally graded plate with rigidly attached point mass | Vinayak Ranjan |
| 5 | 2013MT0113 | Gaurav Tiwari | Mechanical and Microstructural Characterization of Ultrafine Grained Mg-3% Al Alloy | Ashish Mallik |
| 6 | 2013MT0118 | Gaurab Kr Ghosh | Analytical analysis of heat transfer for nanofluids | Subrata Kumar Ghosh and S Sarkar |
| 7 | 2013MT0123 | Najrul Bhangi | Analysis of wear particles of used grease of tapered roller bearing of truck(rear wheel) using analytical ferrograph | N K Singh |
| 8 | 2013MT0126 | Swapna Singh | SOUND TRANSMISSION LOSS OF AN ACOUSTIC ELEMENTMEASURED WITH TRANSFER MATRIX APPROACH USING TWO-LOAD METHOD FROM A MEASURED DATA. |
R N Hota |
| 9 | 2013MT0157 | Gautam Kumar | Electroless Ni-P coating on mild steel substrate | A K Das |
| 10 | 2013MT0173 | Santosh Kumar | Electroless Ni-P coating on mild steel substrate | A K Das |
| 11 | 2013MT0197 | Pradeep Ambedkar | Reliability Analysis of Economizers of a captive Power Plant using Weibull | S Chattopadhyaya |
| 12 | 2013MT0222 | Nitesh Kumar | Electroless coating of mild steel substrate by nickel phosphorus-tungsten | A K Das |
| 13 | 2013MT0241 | Dhruv Mathur | Equipment criticality analysis: a case study | Subrata Kumar Ghosh and S Sarkar |
| 14 | 2013MT0248 | Soumya Sikdar | Tribological study of human spinal cord implant materials | Subrata Kumar Ghosh and S Sarkar |
| 15 | 2013MT0250 | Ahsanul Hoda | Analysis of wear particle of used lubricating oil of rear dump truck using analytical ferrograph | N K Singh |
| 16 | 2013MT0263 | Anvesh Pandey | Comparison of two boiler feed pumps on the basis of reliability analysis | S Chattopadhyaya |
| 17 | 2013MT0264 | Ankit Vishwakarma | Reliability Analysis of a Pulverizer Using Two Probability Distributions | S Chattopadhyaya |
| 18 | 2013MT0368 | Rohith V | A Comparative Reliability Analysis using Time to Failure Data of Mining Shovel | S Chattopadhyaya |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 2012MT0032 | Nishant Kumar | Numerical analysis of Reinforced Polymer (FRP) composite | Prof K.K. Singh |
| 2 | 2012MT0033 | Anand Gaurav | Study of Micromechanical Properties of Glass Fibre Reinforced Polymer (GFRP) BasedComposite on ANSYS | Prof K.K. Singh |
| 3 | 2012MT0251 | Anurag Yadav | Design & Benchmarking of Passanger CAR Tyre for Optimization of Footprint & Mould Dimension | Prof.A R Dixit |
| 4 | 2012MT0252 | Rabesh Kumar Singh | Experimental Investigation of the influence of cutting fluids on Response outputs in Machining Process | Prof.A R Dixit |
| 5 | 2012MT0254 | Parul Jayant | Advance Machining of Nano Composite | Prof K.K. Singh |
| 6 | 2012MT0201 | Prashant Rawat | A Genetic Algorithm Approach for Facility Layout Design problem in CM considering real life manufacturing parameters | Prof.A R Dixit |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 2012MT0097 | Abhinava Chatterjee | Detection and diagnosis of leakages in hydraulic system | Subrata Kumar Ghosh |
| 2 | 2012MT0123 | Chetan Deka | Reliability Analysis Of Mining Equipment | S.Chattopadhyay |
| 3 | 2012MT0124 | Abhinav Gautam | Failure Analysis Of Engine Components | K.P.Ajit |
| 4 | 2012MT0134 | Debanshu Roy | Electro-Deposition Of Solid Lubricant And Its Characterisation | A.K.Das |
| 5 | 2012MT0136 | Pragyabrat Tripathi | Tribological Studies on Glass Fiber Reinforced polymer composite materials | K.K.Singh |
| 6 | 2012MT0143 | Laxmi Kant | Tool wear analyses in Turning operation | A.R.Dixit |
| 7 | 2012MT0146 | Rakesh Kumar Shaw | Numerical Analysis of stresses in Excavator Bucket used in HEMM | Subrata Kumar Ghosh |
| 8 | 2012MT0151 | Sakuntala Nahak | Critical Assessment Of Tool Wear For Coal Cutting Operation | S Chattopadhyay |
| 9 | 2012MT0155 | Sanjeev Kumar | Development Of Spare Parts Management For Maintenance Workshop | S Chattopadhyay |
| 10 | 2012MT0219 | Deepak Kumar Pandey | Critical Terro-technological Analysis Of Mining Equipment | S Chattopadhyay |
| 11 | 2012MT0226 | Surojit Poddar | Fault Diagnosis Of Bearing Using Acoustic Emission And Vibration Measurements | Madan Lal Chandravanshi |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 2011MT0065 | Barnali Paul | Effect of Surface Texturing on Oil control ring-cylinder liner contact under mixed lubrication regime | Subrata Kumar Ghosh |
| 2 | 2011MT0107 | Ashish K Sinha | Electrodeposition of Ni-Si3-N4 nanocomposite coating from a well synthesized Nanocomposite bath | Prof A K Das |
| 3 | 2011MT0112 | Vinay Mishra | ||
| 4 | 2011MT0116 | Vimal K Pathak | Fluid flow analysis through nozzle injector by using CFD | Subrata Kumar Ghosh |
| 5 | 2011MT0118 | Rohi Prasad | ||
| 6 | 2011MT0119 | Manish Rai | ||
| 7 | 2011MT0121 | Brajesh Kumar | ||
| 8 | 2011MT0122 | Shavetabhra Shukla | Numerical Analysis of Diesel Injector Nozzle Geometry | Subrata Kumar Ghosh |
| 9 | 2011MT0127 | Parul Mishra | ||
| 10 | 2011MT0143 | Suyash Kumar | ||
| 11 | 2011MT0145 | Rajeev Nayan Gupta | Analysis of co-deposited micro-sized WC particles in Ni metal matrix composite electrocoating | Prof A K Das |
| 12 | 2011MT0153 | Shiv Prakash Singh | ||
| 13 | 2011MT0155 | Jay Shankar Kumar | ||
| 14 | 2011MT0158 | Rahul Saini | A study on tribological behavior and characterization of Ni-WS2 composite coating | Prof A K Das |
| 15 | 2011MT0175 | Ravi Kumar |
| Sl. No | Admn. No | Name of the candidate | Title of the thesis | Guide(s) |
|---|---|---|---|---|
| 1 | 2010MT0026 | Abhisek kr singh | Numerical study of a radial journal foil bearing for crygonic turboexpender | Prof Subrata Kumar Ghosh |
| 2 | 2010MT0125 | Supriya singh | S Chattapadhyay | |
| 3 | 2010MT0129 | Anupam kumari | Prof P S Mukherjee | |
| 4 | 2010MT0130 | Mayukh sarkar | Experimental and numerical analysis of erosive wear in un-lubricated area of excavator bucket | Prof Subrata Kumar Ghosh |
| 5 | 2010MT0190 | Santosh kr singh | Tribological Studies of Nano Structure Nickel | Prof A K Das |
| 6 | 2010MT0191 | Pratyush verma | Tribological studies of Ni-P electroplated surfaces of EN-31 steel | Prof A K Das/ Prof. A R Dixit |
| 7 | 2010MT0192 | Amit mohan mishra | ||
| 8 | 2010MT0193 | R Krishna Upadhya |
DEPARTMENT OF MECHANICAL ENGINEERING
PHONE:0326-223-5260 (O)
INDIAN INSTITUTE OF TECHNOLOGY
(INDIAN SCHOOL OF MINES) DHANBAD, DHANBAD- 826004 ,JHARKHAND, INDIA
.png)